Trivia Question 23 - NAME THAT PART!
OK, We have not done trivia in a while and ran across this items yesterday working on a parts car and thought it would be a good trivia question. See picture below and name that part!
Two hints: It fits inside something and definitely not something you would find on every 1963/64 Cadillac.
Replies to This Discussion
-
Permalink Reply by Ray Schick on
-
Is it inserted into a hose to prevent collapsing ? Or is it used on a door panel like for a window crank ? Or is it put in the gas tank neck to prevent someone from siphoning gas ….
-
Permalink Reply by Jason Edge on
-
OK... 3 guesses and the 3rd is correct. It is rather large, and goes in the metal gas tank filler neck to prevent siphoning gas. I guess it would prevent anything from getting pushed into the tank.. but siphoning gas prevention would be the main use!
SO, RAY.... HAVE A CIGAR!!!
-
Permalink Reply by 24ro8f5mbs2jc on
-
Size matters. Even if wife says it doesn't... ;-)
Can I suggest using a reference like a BIC-lighter or a soda-can to get an idea about size for next trivia?
-
-
I intentionally didn't want to give a size reference! In fact I tried to take picture in a way that would not indicate size. Makes it more fun not knowing the the size!
Members
Forum
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 6 hours ago. 14 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge 16 hours ago. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch yesterday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
