My power antenna motor operates in both directions, however the mast doesn't raise or lower, although I can do it manually.  For the time being, I have disconnected the motor.  I recall reading about a guy who replaces the unattached/broken cable in these units.  The price was very reasonable, and I believe he was in TN somewhere. I'm also sure that the link to this person was on this website, but have been unable to find it.

I am thinking about placing this Caddy with a classic car consignment business, and I want everything to be working properly.  I absolutely love the car, and have just ordered the correct green rubber OEM-style floor mats for it. Unfortunately, another unique Cadillac that I have been interested in for years just became available, but I have no room in my garage for both of them. 

Facebook Facebook

Views: 249

Reply to This

Replies to This Discussion

Caddy Daddy has the replacement antennas. 

Thanks Tony and Russ for your replies.  Russ, I had already seen that Caddy Daddy has the replacement mast-only setup, but the accompanying you-tube video on how to mate it up with the rest of the unit is a little too complex for both my skill level and luck. They will do a total rebuild for $299, but I don't believe I need that, since the motor is still working properly, and the cosmetic repainting of the hidden unit is not important to me. 

I know the person who just offered the service of replaced the broken or disconnected nylon cord was less $ than this, but I still can't find that resource, and I have checked other sites that I infrequently visit.  I suspect that I will end up paying for more work than I actually need in order to get this fixed. 

That video is showing a complete rebuild. If you buy a mast you don't need to rebuild everything, just remove the old broken mast and install the new. It winds in a cup adjacent to the motor.
The point being if you get a new Nylon cord installed on your old mast you will still have to mate it to your old motor assembly.

Just to add, if anyone IS doing a complete rebuild I do have a large set of mast tubes being cad plating for a like new appearance. Just one of the many items that I am having cad plated while I can.

HERE is the Caddy Daddy Link. I am surprised they don't want Carl Sagan money for it. $139 is not that bad. USA Parts sold them for $99.50 in 1995.

I can rebuild your antenna for 175.00 plus return shipping.  The new mast will be installed and the gears will be lubed. 

Just send me an email to; russ@thecadishack.com  to get started. 

Thank-you, Russ.  My plan is to remove the assembly from the car today.  When that is done, I will get in touch with you.

RSS

Photos

  • Add Photos
  • View All

Forum

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 14 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge yesterday. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service