I have a 1963 Cadillac differential with 80K on it. Found a limited slip a while back, and I do not think I will ever used the original diff.  In is in carlsbad California 92009.  Let me know if you are interested or know anybody we might be

Thanks, Frank 760-840 1350

Facebook Facebook

Views: 276

Reply to This

Replies to This Discussion

Frank, Are you selling the limited slip (optional controlled) differential or a regular hypoid differential? Also, what gear ratio and is this just the differential assembly or the differential assembly along with the rear end assembly? The stamp on front face of carrier will tell you the gear ratio - 1 for 3.21, or 2 for 2.94. There will be a G in front of number if it is the optional controlled differential.   

Jus to add 75 Series (limos) and commercial chassis cars used two additional, lower gear ratios. You can check it out out on this Help Page: Rear End Differentials: Gear Ratios, Controlled Differentials and S...  

3.21 regular hypoid differential out of a 1963 series 62 convert made in Nov 1962 with A/C

Thanks for pointing out the missing information

Hi Frank,

I live in Encinitas and have a '64 Eldo. Surprised I haven't seen your car out cruising around. 

What condition is the diff in?  Other than the 80k miles.

 Is it rusty? Rebuilt?  Any other info?  

I'd like to come by and see it and say hi, and check out your car too.

Let me know, thanks.

Van 

It is fine, I found the LSD and made the switch, but there is nothing wrong with it at all. It is even pretty clean,  the brake back plates are off of it because I swapped the originals to the LSD - They were powder coated. I have 2 originals that are also pretty clean

My cell is in 760 and is 840 and 1350. My Cadillac is waiting for a master brake rebuild - it is a couple of weeks from being complete again. 

Thanks for the info, Frank.  

My Eldo is nut-and-bolt restored, but has the 2.94s, so I was interested in the condition of your parts.

I doubt I'll make any changes to mine, as it garnered 97 out of 100 points at the CLC Nats a few years ago, but it'd be nice to meet and see your car when it's back on the road. 

Let me know when, thanks.

Van

RSS

Photos

  • Add Photos
  • View All

Forum

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal 2 hours ago. 13 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge 3 hours ago. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch yesterday. 3 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado

Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 7 Replies

Greetings Everyone.  I read a discussion thread about "radiator and related", covering coolant overflow.  Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac?  Is there if a…Continue

Tags: Radiator, Bottle, Reservoir, Overflow, Coolant

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service