Coil Springs is one part I generally do not sale (who wants a tired used coil spring), but it is also one of those items I just can't let go up. I have painted them, stuck lights in them, put them here, put them there, use them as yard art, etc. ... but just keep moving them around. I keep thinking I am going to "Make Something", but not sure what.
Today I was moving transmissions and coil springs around, making way for a privacy fence next to our old cookhouse and thought I might share a picture or two. I bet some of you have some cool ideas.
Check out the pictures below and consider what you might use them for...other than a couple of bucks at the metal yard.
Tags:
Cool! I had forgotten about those playground spring rides. That would definitely be one use for them. Need to make the top a little Cadillac car though.
Some of you that go way back with the Chapter may remember some of these "coil spring classic pictures" from years past, but thought it might be interesting to repost a few of them.
First up, is one of my wife Cheryl painting a few different colors. I am sure these were earmarked strictly for garden yard art.
I have dozens if not hundreds of these low voltage LED lights with the old insulators glued to the top everywhere in the yard, down walkways etc, but have been known to put coil springs around those next to the garage. Not sure why, but I got away from that.
Here is a wider angle showing more of my yard art. I know any of you that grew up in the 1970's has an R2D2 in their yard... right?... right!
Here is a set I was painting at some time way back. Just to note, if you end up with several cans of half used old black spray paint, painting they coil springs and other yard art is good use of them!
Since it is getting colder and closer to winter time, Here is a picture from winters past where I simply lined a back corner deck with coil springs. The looked pretty cool in the snow.
Jason,
Some of these pictures are priceless - you and your wife did good work with the springs!
Dennis DiBari
Started by Jeff Donaldson in General Discussion. Last reply by Logan Robb 6 hours ago. 4 Replies 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in Wanted to Buy 19 hours ago. 0 Replies 0 Likes
Looking for a heater control valve 9.795 for my 1964 Deville. ThanksContinue
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Sunday. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin Feb 18. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by