I am considering replacing the shocks in my 64 SDV. They're not terrible, but are a little too wishy-washy. I want to replace them with shocks that most closely approximate the original damping rate so that the original ride feel is not changed.

I am NOT after "handling" or anything that will firm up the ride -just as smooth a ride as was intended by our cars' manufacturer.

So, who likes what for this?

Thanks

Norm

Views: 103

Reply to This

Replies to This Discussion

I have been running and selling the Gabriel Gas Cushioned shocks as a good new replacement for at least 20 years now!  The front shock is 82109, and the rears are 82125.   They give excellent "shock absorption and dampening". The will of course not do anything to fix the support, or non-support rather, of 60+ year old coil springs. The only issue with he Gabriel shocks has been that the upper stud on the rears are a bit short to get both rubber bushing on, and you have to cut one thick bushing in halve, or find thinner bushings. I simply cut them in half. The set that are on my car now, again have been there I'm guessing 20 years. If I had driven the car harder or put more miles I might swap them out, but for now they  work great. 

I do keep a few sets on hand and sell these for $35 each to non-members, or $25 to Chapter Members.
You can also find them at various places online, but have not searched recently. If interested in a set email me. 

There are probably other good gas cushioned shock substituted but I have no experience with other brands.  Jason.

These Gabriel Gas shocks are excellent!  A great recommendation.

Dennis DiBari

Thanks, Dennis

Thanks, Jason. I will contact you privately

Norm

RSS

Photos

  • Add Photos
  • View All

Forum

1964 Cadillac wagon by Victor Body Works

Started by john w. warner in For Sale. Last reply by Logan Robb 12 hours ago. 2 Replies

Its on Hemmings.Needs work!Continue

1963 Cadillac Fleetwood 60 Special Eyebrow Molding

Started by Stephen Pechenik in Restoration Discussion. Last reply by Russ Austin on Wednesday. 6 Replies

I am readying my Fleetwood to be painted.  I need to replace the driver's side left chrome eyebrow molding (below the headlights).  It appears to be made from pot metal.  Mine is broken and I need to…Continue

Tissue holder

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion on Sunday. 0 Replies

Hi everyone I would like to know dose anybody here have a tissue holder fitted to their car if so could you please send me a picture of it thanks in advance Continue

CLC Membership Dues Go Up April 1st - Renew Now Thru March 31 & Lock in Current Rates!

Started by Jason Edge in 1963/64 Cadillac Specific Discussion Jan 17. 0 Replies

CLC Membership dues are going up April 1. Join or Renew between now and March 31 and save! You can even renew with current rates for up to 3 years!Here is a breakdown of the rate increases Effective…Continue

Tags: Increase, Dues, CLC

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service