When I first got my 64 SDV about 8 years ago, the power seat made noise but didn't go anywhere. I promptly read up on it and proceeded to take the seat transmission out to clean and re-lubricate it. I used vaseline and maybe too much of it because for the last year or so the seat was temperamental again. Especially in cold weather. It is worth mentioning that you can try using a hair dryer on the seat transmission if yours does not work, but the motor makes noise. If it works in that circumstance it means the transmission solenoids and rods are gummed up-and will likely respond well to cleaning and re-lubricating.
After removing the rear seat cushion for wiggle room, I unbolted and laid the seat backwards thereby exposing the seat motor and transmission. Unbolting and cleaning went about as expected. The only thing I did differently this time is I used white lithium grease instead of vaseline. Also I crocus-clothed out all passageways and rods. The seat now works perfectly again.
On another note, I purchased a Delco AC Comfort Control tester that will tell me which of my ac components requires replacement. I am eager to find out the results, but wil wait till I stop hurting from this adventure.
Tags:
I'd like to hear more about this comfort control tester!!!
I was about to buy that tester on ebay when it sold. if you ever want to sell it after you fix your car, let me know please.
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 5 hours ago. 6 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
© 2026 Created by Jason Edge.
Powered by