Pictures of the 75 Series HD Rim Posted to "Tires and Rims" Help Topic
I had a very nice original 75 series HD rim I recently pulled in and took the opportunity to get some close up pictures and add them to the Original Tires & Rims Used on 1963 & 1964 Cadillacs article at https://6364cadillac.ning.com/profiles/blogs/originaltires I had previously noted the 3 lb difference in weight between the standard rim and the HD 75 series rim.
Below are the pictures I just added:
Example of a 1964 75 series HD Rim:
NOTE H stamped next to valve stem:
Note Kelsey Hayes, and 15x16 and 64 (year) markings inside rim:
Replies to This Discussion
-
Permalink Reply by 2o7zpdr0iper3 on
-
Perfect :)
-
-
Jason, if you have this rim, please let me know.
-
Permalink Reply by Jason Edge on
-
It has already been shipped out. If you like I can put you on the wait list for the HD rim.
-
-
Please do.
Members
-
Kenneth Barton Online
-
-
-
Travis J. Hensley Online
-
-
Forum
Power steering fluid
Started by Bobby Brown in General Discussion. Last reply by Dennis P. DiBari 6 hours ago. 6 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
1963 AC evaporator core leaking?
Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton yesterday. 2 Replies 0 Likes
Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue
Tags: 1963, core, evaporator, AC
seat foam replacement
Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles yesterday. 3 Replies 0 Likes
does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue
1963 carter afb carbureter stainless steel shim
Started by tim sparks in General Discussion on Tuesday. 0 Replies 0 Likes
anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
-
July 20, 2024 - 63/64 Cadillac Chapter Zoom Meet-Up
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
Videos
© 2025 Created by Jason Edge.
Powered by
