Convertible bumper jack
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
There should be clips in each end inside the opening as seen in my picture below. If yours are missing I have plenty along with the screws that attach them.
-
Permalink Reply by Logan Robb on
-
Jason, are the wooden blocks a factory component? Mine also came with the black wood block for the tire block.
It is mega hot here this week. Perhaps repainting my bumper jack is something easy I can accomplish this week......
-
Permalink Reply by Alan Clark on
-
I believe all Cadillacs of the 60s and 70s came with those black-painted triangular blocks of pine. They did in my 67, 69, and 70 cars. I plan to take the dimensions off those and prepare a block for this 1964 car which is missing the block.
-
-
Did they come with one or two wedge blocks ?
-
-
One block in each of my cars - except the 64.
-
-
63's and 64's had one block.
-
-
Thatd be great! I think I have mine kicking around here somewhere. Let me know what the dimensions of yours is. I think mine was split in two it was so dry. Id like to remake mine as well.
-
-
Measurements of the block in the trunk of my 69 Cadillac:
Picture a right triangle:
Base = 3 1/2"
Height = 5 3/4"
Hypotenuse = 6 5/8"
The block is 3 1/2" thick, so if looking down on the base, you'd see a 3.5" square.
The block in my 67 Cadillac also is made of pine painted black, but the dimensions are a fraction of an inch different.
-
-
This is excellent! Thank you!
I shall remake mine as well
-
Permalink Reply by Kurt on
-
Thanks for this timely post. I forgot about the black wooden block that used to be in my trunk. Not sure where it is now. I recently finished a fence project & had a 6" scrap of 4X4 left over so I just made another with the dimensions you provided. I wish all my car projects were this easy.
-
-
It looks great, but the animated picture is spectacular. The talent in this group is impressive.
-
-
Thanks for the picture. I will investigate.
Members
Forum
Add cruise control/Aftermarket Cruise control
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler 7 hours ago. 15 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Steven Schneefuss' 1963 and Larry Rees' 1964 Spotlighted on Website
Started by Jason Edge in General Discussion yesterday. 0 Replies 0 Likes
If on a desktop or laptop, (or in desktop view mode on a mobile device) check out the header and you will see Steven Schneefuss' 1963 Coupe de Ville and Larry Rees' 1964 de Ville Convertible…Continue
Anyone Aware of a Raised Roof 75 Series?
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
I received the email below and did not remember a raised roof 75 series but thought I would post here. Anyone know of or ever hear of this car?"I am a volunteer at Hillwood Museum and Gardens, the…Continue
Gump(Pat Westphal) you’re a gosh darn genius!
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal Jul 25. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
