Mack's Discussions (76)

Discussions Replied To (57) Replies Latest Activity

"Yes, i did bench bled the MC and it did take me a while to get the air out of it. i…"

Mack replied Aug 2, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"So washer between the caliper and the bracket that’s it’s mounted to, huh? As far as…"

Mack replied Aug 2, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"Just took a pic of my front brakes.  Are you saying that there should be some washer…"

Mack replied Aug 2, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"What was the ‘washer’ issue you had??? What washer are you talking about ?"

Mack replied Aug 1, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"Last year I went over the Master Cylinder and a Booster, measured the internal arm e…"

Mack replied Aug 1, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"I’ve been dealing with that problem for the last 3y (summers) but I am about to go b…"

Mack replied Aug 1, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"They’ve already replaced the prop valve for the disc-disc setup and still it does sl…"

Mack replied Aug 1, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"I have all 4 discs, no drums."

Mack replied Aug 1, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"I’ve got the same kit (front and back) and car slooooooows down instead of stopping.…"

Mack replied Jul 31, 2019 to Disc brake conversion kit

29 Aug 2, 2019
Reply by Tony and Ginny 429

"hi there any more info on the size and length of that tube??? and/or who supplies th…"

Mack replied Sep 8, 2018 to choke tube

27 Sep 10, 2018
Reply by Jeff Kinzler

RSS

Photos

  • Add Photos
  • View All

Forum

Ordering Polyurethane Replacement Trailing Arm Bushings

Started by Dan McNarry in 1963/64 Cadillac Specific Discussion. Last reply by Dan McNarry 4 hours ago. 4 Replies

There seems to be growing interest in the poly bushings. In order for me to keep track of who wants bushings, please send me a message along with or in lieu of a reply to either this thread or the…Continue

What gasket or seal at the PCV pipe under intake?

Started by Tosh Dickenson in General Discussion. Last reply by Russ Austin 11 hours ago. 3 Replies

Wonder what kind of seal goes on the metal PCV pipe under the intake?  It looks like the larger part is kind of a press fit into the manifold but maybe there was a rubber gasket under the bolt that…Continue

1964 Interior AC/Heater Box Removal

Started by Travis in Restoration Discussion. Last reply by Travis 21 hours ago. 13 Replies

Newby question here!  I've read through the shop manual and as many threads as I could find on here, but I'm still stumped on exactly how to remove the interior plastic Heater/AC box from my 64 SDV…Continue

Tags: vacuum, mode, door, box, a/c

Drain plug and speedo bullet seal.

Started by Pete Grodem in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin yesterday. 3 Replies

Hello,Sealing  up my 63 Jetaway duel coupling and questioning the drain plug and the speedo bullet, both used an o ring for sealing. This does not seam proper as the o ring gets crushed when…Continue

Blog Posts

How to sensibly deal with the Corona Virus

Posted by Jeff Kinzler on March 14, 2020 at 5:02pm 6 Comments

https://theamericanscholar.org/covid-19-a-primer/

I found this very helpful, written by a knowledgeable authority in public health. 

Remember, Viruses are not spread by Cadillacs so get out and drive!


Safe & Healthy travels. 

Jeff Kinzler

1963 Eldorado convertible boot

Posted by Les Eastling on February 27, 2020 at 10:33am 1 Comment

I need a used convertible boot for a 63 Cadillac convertible - condition or color is not an issue since it will be used as a pattern for making a new one. One from either a 62 series convertible or an Eldorado would work. I know I am searching for hen's teeth here... but you never know unless you ask!

Looking for 63 Convertible / Coupe rear side trim

Posted by Gene McIlroy on January 24, 2020 at 12:18pm 0 Comments

Want to find a good straight dent free rear side trim for my 1963 Convertible.  I have both sides but they do not match.  Wanting to get them to match.  I am attaching a photo of the two trim sided that I have really wanting the squared off trim if I can get it.  Let's see what you have,…

Continue

Videos

  • Add Videos
  • View All

© 2020   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service