Mark Borer's Discussions (193)

Discussions Replied To (137) Replies Latest Activity

"Thank you to all for your advice and help I soaked the cover plate in ATF last night…"

Mark Borer replied Oct 13, 2020 to Oil Press Light

22 Oct 13, 2020
Reply by Tony and Ginny 429

"Hi all took apart the oil pump housing the cover has light scoring and the regulator…"

Mark Borer replied Oct 12, 2020 to Oil Press Light

22 Oct 13, 2020
Reply by Tony and Ginny 429

"Thx Jason I misspoke.....once the regulator is checked, I would try to spin the pump…"

Mark Borer replied Oct 11, 2020 to Oil Press Light

22 Oct 13, 2020
Reply by Tony and Ginny 429

"Hi Jason I will try cleaning the channel you speak of if I remove that end nut, are…"

Mark Borer replied Oct 10, 2020 to Oil Press Light

22 Oct 13, 2020
Reply by Tony and Ginny 429

"Am going to change out the oil filter and drain a bit of oil from the pan and look a…"

Mark Borer replied Oct 10, 2020 to Oil Press Light

22 Oct 13, 2020
Reply by Tony and Ginny 429

"Thx for the replies it appears to get to this, I have to pull the front of the engin…"

Mark Borer replied Oct 10, 2020 to Oil Press Light

22 Oct 13, 2020
Reply by Tony and Ginny 429

"Hi all just sold it all to someone in Chicago"

Mark Borer replied May 13, 2020 to 63 Sedan DeVille Parts Liquidation

6 Apr 25, 2021
Reply by Edwin Bynoe

"Chris i have this piece.....don’t know if you still need it LMK Mark"

Mark Borer replied Dec 1, 2018 to In search of 63 driver headlight bucket

7 Dec 1, 2018
Reply by Mark Borer

"Got her back from the upholstery shop today their work is done i have some small ite…"

Mark Borer replied Nov 22, 2018 to She's Almost Done!

59 Nov 22, 2018
Reply by Mark Borer

"more work completed windshield in and all front window trim should have interior but…"

Mark Borer replied Nov 15, 2018 to She's Almost Done!

59 Nov 22, 2018
Reply by Mark Borer

RSS

Photos

  • Add Photos
  • View All

Forum

Transmisson Rebuild Time?

Started by Logan Robb in General Discussion. Last reply by Logan Robb 21 minutes ago. 2 Replies

I've posted about this issue in the past and I thought I had it resolved. It would appear I do not as it has reared its ugly head again. My TH400 in the 64 Fleetwood has an intermittent problem of…Continue

Today's project, radiator overflow system

Started by Joe DiIaconi in General Discussion. Last reply by Kurt 15 hours ago. 4 Replies

Installed a radiator overflow system. Could not have been simplerContinue

Intake Manifold air leak

Started by Roland Moser in 1963/64 Cadillac Specific Discussion. Last reply by Roland Moser 22 hours ago. 4 Replies

some of you might remember the air sucking issue i experienced last fall, i went thru 3 intake gasket sets and even with the thick ones from Best Gaskets (14046 E), it still sucked air. not as much…Continue

25% DISCOUNT FOR 1963/64 CADILLAC CHAPTER MEMBERS EXTENDED FOREVER!!

Started by Jason Edge in For Sale. Last reply by Jason Edge 22 hours ago. 1 Reply

I had run a 25% off discount for all parts to 1963/64 Cadillac Chapter…Continue

Blog Posts

Lower Front End Ball Joints

Posted by Logan Robb on May 11, 2023 at 9:04am 7 Comments

Good Morning all! 



I took the 64 into the shop to have some adjustments completed and in the process decided to have the lower ball joints replaced as was recommended the last time I had it in. I ordered the parts and came into the shop. They quoted me nearly $500 to replace those lower ball joints requiring nearly 4hrs of labor. Now this is a reputable shop and they know me by name here and they will continue to get my business. I am just questioning what on earth is…

Continue

1964 power steering sector rebuild

Posted by CHRIS CARLSON on March 20, 2023 at 11:32pm 3 Comments

 I'm having my steering sector rebuilt, and considering changing it from 20-1 ratio 4.2 turns lock to lock to 3.5 turns lock to lock @ 16-1 ratio, If i change from a 3 1/4" box to a 3" box i could have a 14-1 Ratio steering response would be faster, shorter distance to turn the wheel to get a response,   has anyone done this? and how do you like it? thank you

1964 Daville dashboard clock

Posted by Willem Bol on March 13, 2023 at 11:33am 2 Comments

Hallo,

Can somebody help me finding a dashboard clock  for my 1964 Cadillac DeVille Convertible?

Thank you in advance,

Willem Bol

The Netherlands

Does anyone know where I can get the bushings for AC compressor mount on the 429?

Posted by Robert Schles on February 21, 2023 at 11:45am 2 Comments

I've looked at the usual rubber sources but couldn't find any. 

Videos

  • Add Videos
  • View All

© 2023   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service