63/64 Cadillac Website

Fan shroud and rear glass moldings for a 64 De Ville 4 windows sedan

Hi everyone from Miami, I recently bought a 1964 De Ville Sedan and I'm looking for a fan shroud for my 64. Any leads or help? Thank you!

0 members like this

Facebook Facebook

▶ Reply to This

Replies to This Discussion

Permalink Reply by Dennis P. DiBari on November 12, 2024 at 7:55am

Hi Marcello,

If Jason Edge does not have a shroud, I have a lead on purchasing one. I bought one for my 64 Coupe - Series 62, last year. Welcome to the chapter.

Dennis DiBari, Cottekill, NY

▶ Reply

Permalink Reply by MARCELLO CASSANO on November 13, 2024 at 10:41pm

Hi Dennis, thanks for your help! Looks like I found one. I am almost ready to have my '64 on the road, exciting days

▶ Reply

Permalink Reply by Dennis P. DiBari on November 14, 2024 at 8:19am

Hi Marcello,

Glad you found the shroud and the car will be running! If you ever need the source, let me know and we'll email each other.

Dennis DiBari

▶ Reply

RSS

Welcome to
63/64 Cadillac Website

Sign Up
or Sign In

Or sign in with:

Photos

Members

View All

Forum

Power steering fluid

Started by Bobby Brown in General Discussion. Last reply by Dennis P. DiBari 1 hour ago. 6 Replies 0 Likes

My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue

1963 AC evaporator core leaking?

Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Kenneth Barton 20 hours ago. 2 Replies 0 Likes

Hi all,Again I have issues with my AC system. Had it refilled recently but within a few days the system was empty again. The AC mechanic added tracer fluid to check for leaks, but there are no…Continue

Tags: 1963, core, evaporator, AC

seat foam replacement

Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles yesterday. 3 Replies 0 Likes

does anyone out there have any experience with seat foam replacement on a 63/64 Cadillac. I had my seats reupolstered many years ago in original leather/fabric and they still look great, but the…Continue

1963 carter afb carbureter stainless steel shim

Started by tim sparks in General Discussion yesterday. 0 Replies 0 Likes

anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue