1963 Cadillac Seat Belts

[Frank Murch]

I have 2 sets of retractable seat belts from a 64.  I like these and want to use these on my 63.  The anchor points are behind the seat and feed through the back.  The retractable clearly need to be mounted more on the sides.  The problem with the sides is the space under the mount is in the rocker dead space.  It is not easy to mount. 

Where can i mount these? How can I anchor these?  Anybody know??

[Jason Edge]

There are pre-threaded anchor points to the outside of the seat in the relative location of the first picture below. You will need to remove the door sill plate and pull the carpet back find these holes. A shorter bolt is used to on the outer retractors than the inner belts.

On the inner belts you have anchor points just to the rear of the seat at the base of the driveshaft tunnel. The easy way to locate these is to get under the car and push a close hanger or other wire up through the carpet.  You can see relative location in 2nd picture below:

[3ft7bqmb7dryo]

They fit just fine in a 63.  I put a 64 set into my 63.