Hi All,
I just posted a blog of my experience in converting the factory A/C in my '63 Series 62 Convertible to R134a. Everything works great, but I would be more comfortable if I knew where the drain hose for the evaporator case was located so I could inspect it. I'm getting a lot of condensate running out of the bottom of the right front fender, but I can't see the condensate drain from under the car. Anyone have any photos or tips on finding it? The shop manual and parts list publications don't show this detail.
Thanks and check out the blog post if you're planning a 134a conversion. Hope it helps.
-Mike
Tags:
Thanks Gene! That helps a lot! I'm guessing that you can't see this tube at all from outside/underneath the car? It must drain into a body cavity and eventually water finds its way out?
do keep in mind that the water still leaks through that short hose and then will come out at the bottom of the fender anyway. I tried tracking the water flow so that I could use a rubber hose exiting directly out of the car, but the passage winds like a maze through a couple layers of metal and you cant get a direct passage. I almost though of drilling a hole, but gave up and just kept working because that would have been time consuming.
Maybe a better idea would have been to use bed-liner spray but again, I was just trying to get the job done. Its a fun one!
Thomas Online
Started by Christian Doerk in General Discussion. Last reply by Chris McBride 1 hour ago. 1 Reply 0 Likes
Hi friends,after checking all the functions of my Comfort Control of my 1964 Fleetwood, everything is working as it should. The control of the temperature is working really well, except one…Continue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Christian Doerk yesterday. 18 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Thursday. 9 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Started by Robert Dye in For Sale on Thursday. 0 Replies 0 Likes
This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by