Ok... so I had some fun and lit up all lights on my completed rear bumper end lights and took some pictures over a black carpet so I could adjust the background. Here's a couple of pics above and below.

Facebook Facebook

Views: 495

Reply to This

Replies to This Discussion

Ooohh shinny

Looks incredible! 

Pretty bloody good.....

Bumper went back on Dino today very smoothly. Had the boss ready to start the 2 inner bumper bracket to frame bolts while I held in place and started the 2 on the top inside. From there it was all smooth as silk. 
.... AND.... . the contour of the rear center bumper and license guard, etc. are correct. Life is Good!... sometimes! LOL 

Glad to hear you didn't forget any clips Jason let me tell you it's a let down LOL I'm over it now. Therapy helps.....

Pulled the Caddy with new Rear Bumper Bling today and took it for a spin. I think Dino likes the new rear end bling. Here's a couple pictures I took... more are on my FB page:

Must be the week-end for 64's to get a run around the block.

Indeed!

They always run the All American Day as close to July 4th as a Sunday will allow (today). Later in the year, we will have the Thanks Giving Day run, which is the same deal, the closest Sunday to the correct date.

RSS

Photos

  • Add Photos
  • View All

Forum

Rear suspension project

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Dave Fehrle 2 hours ago. 3 Replies

I have started my rear suspension project with the intent to replace bushings on the control links and yoke, shocks, coils and spherical joint. I have the car on jack stands and the transaxle…Continue

Welcome Returning Member Maurice Hamelick from the Netherlands!

Started by Jason Edge in Chapter Discussion. Last reply by Dennis P. DiBari 8 hours ago. 1 Reply

I wanted to give a shout out to returning Chapter Member Maurice Hamelick with his 1963 Four Window Sedan de Ville which was featured in our July 2016 Newsletter. Check out the newsletter via the…Continue

Front door handle lights not working

Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Wednesday. 3 Replies

My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service