Trivia Question 8 - What is A ......
- What is an Idle Spoil Port and what is it's purpose?
- What is it used in conjunction with?
- For EXTRA CREDIT (and more cigars) provide details of when, where, why, etc.?
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
5 hrs later and no guesses, no speculations, no conjectures, no lies, no deceits ...nothing, nada, zilch, nada, nothing! You guys must have celebrated too hard last night! Yee Ha! I'll start giving hints tomorrow if the hangover persists!
-
Permalink Reply by 24ro8f5mbs2jc on
-
My guess is on the carburetor. But got no clue where it is on it or how it would work. Also guessing it could be in the exhaust system.
Most likely however its a computer thing. Where an idle port is being spoiled...
What I do know is that I ain't gonna win a cigar.
-
-
Anders is warm. 2 hints - it is carb related and it is in your Cadillac literature.
-
-
It's mounted to the throttle linkage near the Carb and will only activate, if you really nail the throttle.
Because, every good wife, will be sipping "port" while hubby chauffeurs her around in a 63/64 Cadillac, these cars have a very, and I mean, very rare fitting attached to prevent the initial surge of power, to cause the wife to spill her port, thus "spoiling" her dress, or even worse, the upholstery.
It will activate and return the car to "idle" immediately.
Thus, they are called, the IDLE SPOIL PORT.
A very rare option on all of the peasant models, but standard equipment on the Fleetwood Sixty Special.
Some small portions of the above post, may contain large portions of bullshit too.
-
-
Ahhhhhh .......No!!!
-
-
I'm guessing it's on the carb & has something to do with the A/C ; cause the idle speeds up when A/C is turned on.(?) I don't remember reading about this, is this a '64 only trick question?
-
-
Robert, carb related but not AC or idle speed-up. Applies to both 63 & 64.
-
-
That's a toughie. don't know why you'd want to spoil your idle hmm
-
-
You could be on to something there.
-
-
I seem to remember seeing something about this years ago before swapping my carb for a Edelbrock.Something about two ports in the bottom of the carb that will not let the car idle correctly if the metal shim is not installed correctly ?!?!
-
-
BINGO! Colin gets the Cigar! As noted in the October 1962 Serviceman Bulletin page 50, 2 idle spoil ports were drilled into the carb on late 1962 cars and all 1963 cars, to prevent the engine from idling if the stainless steel shim on the Carter carb is omitted. It goes on to note the shim is needed with the Carter Carb to prevent corrosion from exhaust gases. Here is a scan of the Serviceman entry:
-
-
Interesting. Wonder how/why Cadillac came up with this solution? If the shim was fitted these holes would not be needed and the car came equipped from the factory with the shim. So how many cars had the shim removed to force Cadillac to do this modification? If this problem would have been on one car Cadillac would have done nothing. Same with ten or maybe even hundred. So that gets me thinking that a lot of owners and/or shops removed the shim. Why would they have done that?
Members
Forum
Front door handle lights not working
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Wednesday. 3 Replies 0 Likes
My front door handle lights would not go on when I opened the doors. Bulbs were good and had power to them. Was not getting a ground. The door switch was corroded and wasn't making contact when the…Continue
4,442 Pounds of Cadillac Metal Cadmium Plated! - Pick-Up 12th batch Thursday
Started by Jason Edge in General Discussion. Last reply by Chris Codd on Wednesday. 1 Reply 0 Likes
Vintage Promo Picture #4 - 1963 Fleetwood 60 Special in Nevada Silver
Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Wednesday. 0 Replies 0 Likes
Here is the 4th picture in my collection of "Promo Pictures" - another 1963 Fleetwood 60 Special. This 60 Special appears to be Nevada Silver, Paint Code 14. …Continue
lighted headlight switch
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf May 17. 2 Replies 1 Like
I had to replace the heater core in my 63 SDV, so I decided to replace all the dash lights with LED's. and replaced all the vacuum lines. While I was in there, I added a light to the headlight switch…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
