Another Great Day for Cruising with Dino & The Pooches
Had gorgeous weather here in NC again today and did that mandatory cruising around this afternoon. This time I stopped in front of the Garner NC water tower downtown Garner and about 1/2 miles from my house and took this late in the afternoon picture. There is a lot of shadow but if you look closely you will see couple of fine looking Yorkies propped up in the back seat!
Tis the Season...
Replies to This Discussion
-
Permalink Reply by 2o93f8rdftyzj on
-
Hey Boss, was it Dino's birthday yesterday?
-
Permalink Reply by Jason Edge on
-
Yes, Build date was March 19, 1964... so Mr. Dino turned 54!
-
-
Cool.
Our Fleetwood gets a party hat on Sunday the 25th.
On your build sheet Jason, your car is down the page a tad, but on ours, we are on the top. Would I be correct in assuming our car was first off the floor on that Wednesday in 1964?
-
-
Kevin, There were 17,559 Cadillacs built in March, 1964. Even if they did build 7 days a week that would average 452 cars a day! My build sheet only has 25 cars so I would assume there would be about 18 build sheets a day. If they had a standard Mon thru Fri production that means you only have about 22 to 23 days to produce those 17,559 cars in March which would mean you probably have close to 20 build sheets per day. There's really no way of knowing where your build list page falls within all the build list pages for that day unless you have access to the preceding and succeeding pages.
-
-
Ha ha ha, I hadn't really given to much thought to that,... now did I..... PMSL
Never said I was the sharpest knife in the drawer.
I might just go sit in the dunces corner for a bit.
-
-
Geez Tony, you talkin about Jason or Dino being a sexy thing.
-
-
Ta
-
-
Tony, Body Plate on top of cowl will tell you at least month and week. Here is the link for info on the Body Plate including the Production Date Code at top: http://6364cadillac.ning.com/profiles/blogs/body-name-plate
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 10 hours ago. 6 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
