Had gorgeous weather here in NC again today and did that mandatory cruising around this afternoon. This time I stopped in front of the Garner NC water tower downtown Garner and about 1/2 miles from my house and took this late in the afternoon picture. There is a lot of shadow but if you look closely you will see couple of fine looking Yorkies propped up in the back seat!
Tags:
Hey Boss, was it Dino's birthday yesterday?
Yes, Build date was March 19, 1964... so Mr. Dino turned 54!
Cool.
Our Fleetwood gets a party hat on Sunday the 25th.
On your build sheet Jason, your car is down the page a tad, but on ours, we are on the top. Would I be correct in assuming our car was first off the floor on that Wednesday in 1964?
Kevin, There were 17,559 Cadillacs built in March, 1964. Even if they did build 7 days a week that would average 452 cars a day! My build sheet only has 25 cars so I would assume there would be about 18 build sheets a day. If they had a standard Mon thru Fri production that means you only have about 22 to 23 days to produce those 17,559 cars in March which would mean you probably have close to 20 build sheets per day. There's really no way of knowing where your build list page falls within all the build list pages for that day unless you have access to the preceding and succeeding pages.
Ha ha ha, I hadn't really given to much thought to that,... now did I..... PMSL
Never said I was the sharpest knife in the drawer.
I might just go sit in the dunces corner for a bit.
Geez Tony, you talkin about Jason or Dino being a sexy thing.
Ta
Tony, Body Plate on top of cowl will tell you at least month and week. Here is the link for info on the Body Plate including the Production Date Code at top: http://6364cadillac.ning.com/profiles/blogs/body-name-plate
Started by Christian Doerk in General Discussion 7 hours ago. 0 Replies 0 Likes
Hi friends,after checking all the functions of my Comfort Control of my 1964 Fleetwood, everything is working as it should. The control of the temperature is working really well, except one…Continue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Christian Doerk 7 hours ago. 18 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Thursday. 9 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Started by Robert Dye in For Sale on Thursday. 0 Replies 0 Likes
This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by