Last fall I replaced my rear yoke and trailing arm bushings . Now with 410 miles on them the large
rear trailing arm bushings are done . I contacted Rare Parts the maker and they were defensive and
wanted me to purchase new ones and if sent the old ones back they, upon inspection would reimburse the original seller (Old Parts) a seller on ebay. Seemed like a lot of hoops to jump through so I inquired at all the
known Cadillac Suppliers and it seems the Rare Parts is the only maker of the RP15606 bushings . Further
internet searches found this is a common problem. This has led to Dan McNarry and Russ Austin heading up making replacement arms with high tech bushings that do not distort and last. Rare Parts needs to retool and use rubber that will last . In the mean time DO NOT purchase trailing arm bushings from them with the
expectation they will last as I assure you they will fail quickly
Tags:
I put the new trailing arms in all the cars I work on. Huge difference.
Hi Russ
Could you please describe what you did?
are you making up emplacement rear arms?
Thanks
Jeff Kinzler
I do not make the trailing arms, I was the test bed for them. Dan makes then. The arm is constructed out of square tubing. Poly bushings are used that are readily available, but the control arms come with them.
It is a complete assembly ready to bolt up. There are no modifications involved.
You can reach Dan at dmcnarry@telus.net
I can also attest to this, put a new set of the Rare Parts rear control arm bushings in a 64 Sedan Deville 2 months ago and after 600 or so miles, they are distorted and sagging worse then the old ones that I had replaced.
I put a pair the McNarry rear control arms in my 64 Fleetwood last year and am very happy with them........should have just did the same with the Deville, but I was just trying to save a few bucks. Will cost me more in the end now!
Here’s a company in Georgia that manufactures this type of bushing: Their size chart is metric perhaps they could match what is needed for the rear control arm application
AV also says that they will make bushings in unique sizes.
In the mean time I identified another source for rear bushings: Caddy Daddy. Their site also lists the dimensions of the bushings.
Regards,
Jeff
I guess, I am just not getting the point of the new control links and bushings. Why doesn't Dan McNarry just put the new bushing (that don't distort) in good refurbished control links? I have a good stash of both 63 and 64 style control links for someone to push the old bushings out and put new bushings in. So, I guess I'm asking if Dan can put bushings that hold up in this "squarish" fabricated control link that will hold up, can't he do the same in a stock control link? My problem with this is the control links look "Frankenstein-ish" and viewed from the rear of car or underneath looks very made-up and un-original. If originality was not a concern, I would have less problem with these... but still look boxy and contrast with the look of the undercarriage. Sort of like dual chrome tips sticking out the end of the car might be fine for what you are after, but those that want a stock look ... like me on my 64 CDV, would cringe at putting these under my 64 CDV. I applaud anyone taking the initiative to reproduced parts to keep these cars on the road and provide alternative means to an end, but have to be honest and say these are glaringly butt-ugly from my perspective. They look like something I might expect to see on a rat-rod or down at the strip on a tubbed roadster.
I've had no issues with the stock control links...and find they are pretty tough. I've seen some where people have tried to jack car up on the outer lip and damage, and one or two that may have been in a wreck that bent them but the stock control links are pretty tough. They way they mount to the rear axles and frame give little room for flexing, ... just don't see the advantage other than this has a bushing that holds up well... then again I ask why not just put them in a stock control link? Is it a matter that Dan cannot find good donor original control links, or cannot put his type bushings in the control link? So what am I missing?
Jeff... my point... why make up an entire new control link that looks "fabricated" when you can just get good used original control links and install the good bushings.
ps.. that would have been my dream car at age 16 ... although I really dug the Keystone Classic Mags. Those would have made this car righteous!
I agree with you 100%!
Tony, Can you check around to see if someone can revulcanize the original bushings if someone sends them a core. Perhaps you can contact Steele Rubber? Let us know what you find out. As far as the CLC most members of the forums are non-members so please post your question and give us the feedback. Here is the link: www.forums.cadillaclasalleclub.org
Jason,
Maybe you didn’t see it but I did some research on an earlier message and found a manufacturer in Georgia, USA who makes these types of suspension bushings with rubber.
Perhaps you could furnish a sample to them and they could match it up and quote us a price.
When you get back of course.
Here’s the info:
Started by Jason Edge in General Discussion. Last reply by Bill Wolf on Friday. 36 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Friday. 2 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Started by Norman Silverman in General Discussion. Last reply by Norman Silverman on Thursday. 11 Replies 0 Likes
Hello AllI have taken off my dash top and started replacing dash bulbs with LED's for greater visibility. Some questions:1) To replace the Gauge bulb it looks like easier access is had by removing…Continue
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Wednesday. 3 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by