We have a restoration forum  I never post much here but thought I would share an in progress restoration ... just one of many.

Those long coupe/convertible are rests are in pretty high demand and am reluctant to throw them out these days. I've had pretty good luck repairing minor cracks and respraying them black or white.  The last parts car had a really nice driver side arm rest and is headed to Australia. The passenger side had pretty decent side vinyl and OK top vinyl but 2 significant cracks.  In fact it was almost broke in half. Anway, I thought I would clean and try the epoxy trick and srape with the vinyl paint and see what I end up with.

So, here is what I'm starting with. Is it worth trying to save? 

Views: 425

Reply to This

Replies to This Discussion

If these are ABS, I would use ABS glue and a thin piece of ABS to fish plate the back side bridging the cracks. If not ABS, find an appropriate solvent base adhesive and compatable material to fish plate the break. Solvent base adhesive will weld the material together making a stronger repair. HTH

David, I've done them before ... although not on cracks this extensive.  The epoxy's available at the local home improvement stores seem to do the trick and hold permanently.  Just make sure they are rated for plastics .. .some are not.  I've experimented with a few but have migrated toward using J-B Weld 50176 KwikWeld Steel Reinforced Epoxy. It is listed for various plastics and PVC and can drill sand, etc. It starts to set in about 6 minutes and and cures in about 4 to 6 minutes. I cleaned this arm rest earlier today and just applied some of the epoxy and will get some pictures up tomorrow. 

mine look just like that,, i havent tried to fix them as i just thought it was character, but they dont rattle or shake ,,  the do fine on my 63 coupe.. mine are same color as this one..

I was considering the idea of making a few of these out of stainless steel and giving them a brushed steel look to match the top of the door handles. I think it would look good if I could make it match the dimensions and curves of the original plastic piece. 

Ok,epoxy has cured and bond feels very strong. In fact it feels like the plastic would break way before the epoxy breaks.  When I set it, I let it tack for a about a minute or so with some epoxy in the gap then put a heavy amount on the back and and thin amount on the front ... since I will need to sand down smooth. Here are some pictures:

Exterior smooth down smooth as that layer was more to hold in place as the back and in the cracks cured. Now I do my little trick with some Pro Bond wood filler. It usually takes a few layers... but usually helps cover the old crack. I have used the PlasticWeld JB weld to smooth out over the crack line but the wood filler seems to work as well and once mounted to the door panel should not be flexing.

Would some type of fiber tape. On back of panel help w structure, mixed w the epoxy or watever setting compound you used

Probably hundreds of way to skin this cat. I'm sharing what I have done on the past that has worked. The J-B Weld Steel Reinforced Epoxy seems more than efficient. I believe you said yours were cracked... might be a good chance for you to try your suggestion and report back. So far I've got about 15 to 20 minutes in this project in addition to about 15 to 20 minutes I probably spent giving the arm rest a good cleaning. 

Gotta tackle the leaks, but good to know a repair is possible

What color paint will u use or will you just get the paint store to dyermine the colorv with there digital scanner andhv them mix a smaal amount , then touch up?

Black.

well that would certainly get rid of any need to match,,,,,makes perfect sense for re sale, 

Thanks Tony for the detail on the two products.  

RSS

Photos

  • Add Photos
  • View All

Forum

Modern radio antenna …

Started by Mack in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies

Just replaced radios for the modern radios with Bluetooth and all the dance things and wanted to share how I went around the antenna knob… I’ve installed a regular two way GM window switch in the…Continue

BOOT

Started by John Inglesby in 1963/64 Cadillac Specific Discussion. Last reply by Marty Smith on Tuesday. 1 Reply

I recently purchased a new boot for my 64 convertible and was wondering how difficult it s to install. I'm not very mechanical. It looks like the chrome piece behind and at top of seats needs to be…Continue

63 Exhaust Hanger Mystery

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Cees de Bunje on Monday. 8 Replies

I'm in the process of installing a stainless steel single exhaust from Classic Exhaust on my '63 Coupe de Ville. I'm running into a mystery regarding my middle exhaust bracket. I have the bracket…Continue

TH400 Dipstick Tube Seal

Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb on Monday. 9 Replies

In my “rebuild” of the transmission, I ordered a dipstick tube seal. However, I’m not sure if the right one came or how to best install the seal. I am wondering if anyone has replaced this seal OR…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service