HELP! Need replacement Carb: Carter AFB. 3655S
Dear Listmates,
Does anyone have a replacement Carter AFB Carb (3655S) (or know where I can get one quickly) for my '64 De Ville Conv. (with the Transmission solenoid and bolt on mounting plate for the throttle assembly)?
I'm in a bit of jam...
My direct email is Michael.Vogler@gmail.com. PH. 626-375-5843.
Thanks, in advance!
Michael Vogler.
Replies to This Discussion
-
Permalink Reply by Jason Edge on
-
These 58+ year old carbs are getting harder and harder to find. They are out there but not as readily as they were 20 years ago. I have 6 customers on my Wait List looking with Wait Time spanning back a couple years. You may get lucky and find one "quickly". If not, the Eldelbrock 1406 is a good substitute with only a few issues that you will have to be addressed. For more info on this carb and the larger CFM 1400 check out this link: Carburetor - Edelbrock 1406 & 1411 Installation Summary
-
Permalink Reply by Michael Vogler on
-
Thank you for the reply and suggestion.
-
Permalink Reply by Ray Schick on
-
-
-
Thank you, Ray. I will check it out.
-
-
Tony,
Thank you for the detailed reply and advice. I'm trying to keep the car as stock as possible, but I recognize that the age of the car may make that impossible ultimately. Mike
-
Permalink Reply by 3ft7bqmb7dryo on
-
I have a core that will need to be professionally rebuilt. It needs a good sonic cleaning. 100.00 It is the 3656S and has a rebuilt kick down switch and bracket.
email me at russ85747@hotmail.com
Members
Forum
where to find 1963 Cadillac Plastic Door Pin Anchors
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf 4 hours ago. 1 Reply 0 Likes
Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth yesterday. 15 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
