63/64 Cadillac Website

Free- 64 lower bumper bucket - Passenger side

This is in rough shape. Not only is there rust in the usual places but it is also bent. I replaced this piece on my car after an accident, but since this is a hard to come by piece, I figured someone may be interested in bringing this back to life.

Just pay shipping from 14609.

0 members like this

Facebook Facebook

Attachments:

89FCFBA7-E0D9-4D1A-B0EC-8D6D14FE9379.jpeg, 4.3 MB
EE6A6197-719D-428A-802E-D32467F10BBD.jpeg, 4.5 MB
785F37C4-CBCB-4236-91B8-A5D2238F2828.jpeg, 4.4 MB

▶ Reply to This

Replies to This Discussion

Permalink Reply by 0mcyq6vc1enfh on September 24, 2021 at 4:39pm

Is this rusted all the way through?

▶ Reply

Permalink Reply by Michael Buonaccorso on September 26, 2021 at 10:15am

Yes part of it is

▶ Reply

Permalink Reply by 0mcyq6vc1enfh on October 24, 2021 at 2:17am

Any way you could send me an email with a few pictures?

▶ Reply

Permalink Reply by Michael Buonaccorso on October 24, 2021 at 12:39pm

Are you able to see the pictures attached to the original post? I actually put this in the recycle bin yesterday but garbage doesn’t come until Wednesday so if you want it please let me know ASAP. michaeljunior@gmail.com

▶ Reply

Permalink Reply by 23dx5rip2nibg on October 29, 2021 at 7:00pm

Jeremy, I have 2 buckets from my 1964 deVille convertable restoration. Passenger side is perfect. Driver side is nice compared to the one being given away. Please contact Jon if you have any interest. 5613010659

▶ Reply

RSS

Welcome to
63/64 Cadillac Website

Sign Up
or Sign In

Or sign in with:

Photos

Forum

Dino Diaries - July 11, 2025 - Busted!

Started by Jason Edge in General Discussion. Last reply by Jason Edge 13 hours ago. 4 Replies 0 Likes

So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue

Bleeding brakes

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Thursday. 3 Replies 0 Likes

I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 8 Replies 0 Likes

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Getting hot when going fast…

Started by Mack in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies 0 Likes

So… I do have a few of 63 Coupes, all have same setup with carbs, Pertronix, shroud, new US Radiator radiators etc … but only one of them gets a bit hot when I am hauling faster than 60mph and car…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue