When I got my 1963, I was in High School (1977).  The Cadillac was not valuable at the time. Over the years I purchased auto parts from the parts store and kept it running.  Now the car is worth something and all those replacement parts are wearing out.  I have started to source original parts and have them rebuilt (renewing the originality of the car). Jason sent me an alternator core with the right markings, and I had it rebuilt.  Jason asked where and I realized, most people do not have the right source to have them rebuilt.  I had my rebuilt at 
Richer Auto & Truck Electric
4145 Avenida De La Plata, 
Oceanside, CA 92056
(760) 757-1201
James Richer
It is excellent in every way. The "new in 1963" alternator is not this good. The stampings, and casting numbers are correct. The outside is all 1963, but there is nothing on the inside that is not new or improved. I think it would not get any points reduction in a concourse inspection, but it is rock solid and will power that grateful dead 8 track at 120 decibels
Richer Auto is an old company, been around for years and has done mostly wholesale to the trade, but this morning he is telling me a growing part of his business is restoration and individuals that are restoring classic cars, there is also a group of customers with race (Harsh environment) applications. 
It turns out he would be available to people who appreciate quality. If you want cheap, Ebay or the local Advance Auto will still be the place with a Chinese rebuild and a "life time warranty" but if you want the right part, this is a great source
Oh,  I think these would be North of $200
Thanks

Facebook Facebook

Views: 127

Attachments:

Reply to This

Replies to This Discussion

Substantially more than the original.  I am not sure if Jim did me a favor or if he would do it for you - ask him, but I am not short of amps

Frank, Thanks for providing the rebuilders info. I had added this to our Parts Supplier page earlier today. Always good to have good sources for this type of service.

RSS

Photos

  • Add Photos
  • View All

Forum

where to find 1963 Cadillac Plastic Door Pin Anchors

Started by Frank Murch in 1963/64 Cadillac Specific Discussion 8 hours ago. 0 Replies

Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue

Rear Main Seal Oil Leak Fix with Bearing Cap Modification

Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth 11 hours ago. 15 Replies

Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue

Future of CLC Judging

Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies

First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system.  The old system was very good, however, I believe what Bill and the…Continue

front seat crest

Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies

Original seats had a crest on the center arm rest.  Does anybody know where I could embose a crest in new material for a reupolstry?Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service