Comfort control wiring

[Larry Rees]

I have a red (looks pinkish next to yellow in the picture) wire going to the back of the comfort control from the fuse panel with a 25 inline fuse. As always someone as added this on. I can’t find out why it would be there since manual and Tim Groves booklet says power is delivered through a yellow wire. All wires are accounted for from the books but this extra red wire that goes to this terminal. Any ideas?  Thanks Larry4179E613-706D-49F3-B686-737ED0D46064.jpeg

[Jason Edge]

You should have a short red wire that comes up from around from the bottom at the amplifier assembly to the comfort control switch and plugs into the side. See pictures below for stock configuration. Someone as done some creative wiring your system.

[Larry Rees]

Thank you for the pictures they help when trying to visualize the right placement of wires in the harness. When something didn't work the person had his own vision of how to fix things through creative wiring. The fuse box is a piece of art. LOL

[Jason Edge]

Larry, Not sure if this would help  you out ... I think it would, but I usually sell the 64 dash harness including fuse box and all connectors for $100, but would do a super deep Chapter Member Discount and sell you one for $25.  I can ship to a US address for $15 for a total of $40. If needed to go to Canada I would need to look up shipping ... probably not that bad via UPS.  I would send a dash harness from an AC equipped car which would give you all the stock comfort control connectors. I would remove the fuses from fuse box and bulbs from the dash bulb connectors.  If interested shoot me an email to [e-mail]. I am wrapping down for a 1 week vacation after today until the 28th .... and could possible get one shipped today or tomorrow morning, or if not in a hurry after I get back. Just one option if you have a real wiring mess. It would at least give you a good guide.