Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. 

My 64 Fltwd did not leave the factory with cruise control, as much as I wish it would have. But I am wondering what it would take to ADD the factory cruise control nearly 60 years later? Are there a/m units that would work better? Have you tried it?

Let me know if this is even something that can be done!

-Logan

Views: 530

Reply to This

Replies to This Discussion

I added a rostra unit to my 64 as it did not come with a factory cruise control. One of my favorite things I've done to my car after restoring my climate control system and adding fuel injection. 

The one thing I suggest is that the firewall dashpot that prevents the throttle from slamming into it be in excellent working order. You can find them new online and they come in all shapes and sizes. Whenever you touch the brakes the throttle releases instantly causing the carburetor springs to slam the throttle to the firewall. The dashpot acts as a shock absorber that slows the throttle arm down a bit before it hits the firewall. 

You can see the unit located on the drivers side fender well 

That’s a good tip! Thank you! Glad to see two people have used the rostra unit and have been pleased! 

I think a restoration of my Climate Control will be before the cruise. But I am glad to know cruise can be added after the fact! 

-Logan 

RSS

Photos

  • Add Photos
  • View All

Forum

64’ A/C Power Servo - Vacuum Actuator

Started by Jacob Foster in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Monday. 2 Replies

Gents, good morning!I’m looking for advice on how to fix the A/C Power Servo on my 1964 Cadillac Deville. The unit itself seems to be working correctly, but the vacuum actuator is leaking off. Has…Continue

Transmission and power seats

Started by David Erickson in General Discussion. Last reply by Linda M. Brooks on Monday. 3 Replies

Couple of question on my 63  Park Avenue1.  I had my car worked on last summer by my mechanic who restores casr primarily.  He does not work on transmissions.  He said there was a small transmission…Continue

1964 Cadillac Owners - Are You Missing the Inner Fender to Frame Rear Brace Rods?

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks on Sunday. 7 Replies

Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue

63 & 64 Eldorados at Mecum Auction in Kissimmee

Started by Jason Edge in General Discussion. Last reply by Dennis P. DiBari on Friday. 1 Reply

Here is a 1963 & 1964 Eldorado I saw at Mecum auction in Kissimmee, Florida today.  This was today’s main activity as part of the 2026 CLC Winter Reunion in Orlando. There are over 4,200 event at…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service