Lee Martin's Discussions (132)

Discussions Replied To (88) Replies Latest Activity

"@Kurt - Thanks, so simple yet I would never have thought of that - will give it a tr…"

Lee Martin replied May 19 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"You won't believe this but I just finished putting the old one back and the steering…"

Lee Martin replied May 18 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"Turns out I'm screwed after all - the new lens doesn't fit.  They must have had diff…"

Lee Martin replied May 18 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"Yes you are right Kurt.  I painted the needle and adjusted it today - since I bought…"

Lee Martin replied May 18 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"One last question - I'm looking at disconnecting the heat/AC unit from bezel.  The m…"

Lee Martin replied May 18 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"Success!  I was able to lower the column without touching the floor brace - glad bec…"

Lee Martin replied May 18 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"Boy, does that explain a lot - picture #2 is my exact same setup.  I'll give it anot…"

Lee Martin replied May 18 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"The lens is on Ebay (where it will remain for the next 40 years), if anyone wants it…"

Lee Martin replied May 17 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"When I took the lower cover off, I could see the bracket and a hanging device, sort…"

Lee Martin replied May 17 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

"Thanks Jason.  I did take the bottom off and the way mine is set up there is an odd…"

Lee Martin replied May 17 to Help! 1963 Shifter Bezel and Lens Removal Problem

24 May 19
Reply by Lee Martin

RSS

Photos

  • Add Photos
  • View All

Forum

63 rear main seal

Started by Luther in 1963/64 Cadillac Specific Discussion 5 hours ago. 0 Replies

Hello all , just spent better part of the weekend installing a new rear main seal and pan set on my 63 390 , all though it slowed the leak down considerably , l still have a drip , l used a Felpro…Continue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in For Sale. Last reply by Jason Edge yesterday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Valve stem seals for 429?

Started by Matti Roth in Restoration Discussion. Last reply by Matti Roth on Friday. 7 Replies

Hello!I am rebuilding 429 for 64 DeVille and got Felpro head gasket kit including valve stem seals. Is it recommended to install those even though they are not originally used? O-rings will be…Continue

Blog Posts

Can you help? Driveshaft Question....

Posted by Chris on May 30, 2021 at 8:55am 1 Comment

Hello!

Newbie to the group here - we have already found tons of invaluable information on the board, so thanks! We are restoring a 1963 Series 62 Convertible. We are wondering if anyone knows of a source to buy the propellor yoke flange (that bolts to the pinion flange) for the driveshaft? One of our ears partially broke off. Not sure if we can buy just the yoke flange as an aftermarket part, or if it has to be rebuilt by a welder/fab guy? Maybe a salvage yard for a source? Again, any…

Continue

Thank you Kurt re: VIN location

Posted by Robert Pellow on April 19, 2021 at 1:07pm 0 Comments

I just wanted to say a thank you to Kurt for steering me to the tech tips page on V.I.N. locations.  Excellent information.  Thanks a bundle.

Robert Pellow

V.I.N. where?

Posted by Robert Pellow on April 18, 2021 at 1:41pm 6 Comments

Where can I find the V.I.N. on a 63 convertible?  The usual space at the base of the interior windshield on the driver's side has been decimated by weather.

63 Trunk detail

Posted by Bob Pontius on April 8, 2021 at 3:07pm 6 Comments

Jason, I liked the detail and information you have provided. I would like to do mine similar to yours. Can you help? Do you have trunk material? OPGI is sending the trunk product for my 63 Fleetwood. But it does cover the entire trunk as yours was done. If you do not have can you give me a reference? Thanks!! Bob

Videos

  • Add Videos
  • View All

© 2021   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service