Logan Robb's Discussions (159)

Discussions Replied To (114) Replies Latest Activity

"I’d bet that is where the seal is intended for. I will check when home. that being…"

Logan Robb replied Mar 25 to TH400 Dipstick Tube Seal

9 Mar 25
Reply by Logan Robb

"Thanks! I appreciate the help. I got a new modulator and it came with an o ring, so…"

Logan Robb replied Mar 22 to TH400 Dipstick Tube Seal

9 Mar 25
Reply by Logan Robb

"Isn’t that the modulator port? I’m thinking now I am getting my wires crossed haha.…"

Logan Robb replied Mar 22 to TH400 Dipstick Tube Seal

9 Mar 25
Reply by Logan Robb

"Yes correct. Where the tube goes into the pan. No seal there? Then what is this o ri…"

Logan Robb replied Mar 22 to TH400 Dipstick Tube Seal

9 Mar 25
Reply by Logan Robb

"This sounds like a good plan however, I don’t plan to remove my dash at this time. T…"

Logan Robb replied Mar 12 to Speedo Cable lubricant

4 Mar 12
Reply by Logan Robb

"May be worth inspecting the yaw mounts before jumping in too deep. Mine still might…"

Logan Robb replied Mar 10 to Yaw bumpers

11 Mar 10
Reply by Jason Edge

"Thanks for the link! Yeah, CD is always pricey, but in my experience, you are gettin…"

Logan Robb replied Mar 10 to Yaw bumpers

11 Mar 10
Reply by Jason Edge

"Yeah, rubber ready to ship would be preferable. Shouldn't need cores. Caddy Daddy ap…"

Logan Robb replied Mar 10 to Yaw bumpers

11 Mar 10
Reply by Jason Edge

"This is a good photo! Is there a reputable source for these yaw bumpers? Id like to…"

Logan Robb replied Mar 10 to Yaw bumpers

11 Mar 10
Reply by Jason Edge

""

Logan Robb replied Mar 9 to Speedo Cable lubricant

4 Mar 12
Reply by Logan Robb

RSS

Photos

  • Add Photos
  • View All

Forum

Headed to Birmingham Tomorrow!

Started by Jason Edge in General Discussion on Friday. 0 Replies

I have been quiet lately, and just wanted to jump in an chat a minute. I have back to back visits to potential CLC  Winter Board and Grand National Sites, not to mention I have been pushing to get…Continue

On Busy Day Yesterday!

Started by Jason Edge in General Discussion on Friday. 0 Replies

Very busy day working the parts cars yesterday, pulling engine and transmission out parts car #59, getting parts car #60 off the car hauler, then parts car back up on car hauler for final…Continue

Replacement 63 Radiator Recommendations

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth Apr 30. 1 Reply

My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue

T-3 low beam headlight

Started by Jeff Donaldson in Wanted to Buy Apr 29. 0 Replies

Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service