I’m at the beach, without access to my many pictures, and rereading the 63 Cadillac Spec manual and ran across this statement about the top of 60 Special crown moldings being painted. I have only parted one of these and cannot remember if it was painted. Looking at pics I can access online from my iPhone it is hard to tell. Some 63-6039’s look like they could be painted and some do not. It would be easy enough to remove the paint with Acetone and of course per article cars with optional Eldorado Fire Frost or special order exterior color would have the standard chrome finish.
Just to be clear this is the long Crown molding that runs parallel to hood … and not the short front fender tip trim which was always painted the same as exterior of car in 1963.
I would like to hear from our 1963 Sixty Special owners, or that know for sure. Is the top of your crown molding painted or chrome.
Here is the spec manual information:
Tags:
both of the 2 I parted out where painted down the center
Thanks for confirming! Any others with a 63 Fleetwood 60 Special?
No. Fender crown physically different (center ridge on 63 giving diamond cut appearance, smooth cupped top on 64) and no paint on top center per spec manual, other literature or the 4 I have parted out, and several I have seen. I think it made more sense as a way to accentuate the 1963 60 special since it would have the matching painted front fender tip … which of course was chrome in 64.
That explains it. I was wondering why Kevin, who seems to be back with us lately, hasn't piped up about another Fleetwood feature not shared with "lesser" models : )
Yeah, he's probably sulking that they deleted this option from the 64 Fleetwood ... he's already having to deal with the no Eldo horn, which even a well optioned Coupe de Ville I know has this basic option!
For those that don't know us, Kevin and I like to pick at each other!
LOL... we do Jason.
Hi Kurt, yeah, i check the place now and again.
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
Started by Jason Edge in Chapter Discussion yesterday. 0 Replies 0 Likes
Chapter member Alan Clark and owner of a 1964 Eldorado sent this and wanted to share with everyone in case there are others nearby that might want to attend:"I'd like to invite the 63/64 chapter…Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Friday. 7 Replies 0 Likes
I have got a flood of email, texts, about the 63 Eldo that recently bid up to $120,000 and thought I would share for those that have not seen it.Here is the link:…Continue
Started by Jason Edge in General Discussion Aug 6. 0 Replies 0 Likes
Incredibly, in 3 days I have had 3 people ask about replacing their fuel pump or even adding an electric fuel pump because there carb is not getting gas. It has gotten to the point I have copied and…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by