1964 Cadillac 429 HydraMatic Long Block Running Engine - $800 ($600 for Chapter Members)

Click Here for many more pictures on my Facebook Parts Page.

I have a 1964 429 engine with the HydraMatic Crankshaft pulled from an running 1964 Cadillac up for sale.
Owner was doing an LS Swap and lived nearby so I picked up the running engine and shifting transmission.

CONDITION. The owner said this engine ran well, had no issues, but wanted a modern powerplant.

ENGINE RUNNING VIDEO LINK: https://www.facebook.com/share/v/16XLdN179s/

From my experience IT IS IN EXCELLENT CONDITION. No bolt broke removing any of the manifolds or front engine cover, all nylon is on the camshaft timing gear, and it is just a clean smooth turning engine!

FITS: 1964 Cadillacs with the HydraMatic Transmission (ie. Series 62, 75 Series, Commercial Chassis only). DOES NOT FIT the other 1964 Cadillacs with the Turbo HydraMatic transmission. This is due to the different raised mounting area on the back of the crankshafts for the HydraMatic (3 3/16") vs the Turbo HydraMatic (3").

ALSO FITS: 1963 Cadillacs, but you need to use your 1964 external parts.

HAS HYDRAMATIC CRANK NEEDED TO DROP INTO A 1963 CADILLAC REPLCING THE 390. Simply swap your externals over to this engine. Many of my customers ask if a 1964 429 will bolt into their 1963 to replaced the 390.

PRICE: $800 ($600 for 1963/64 Cadillac Chapter Members)

DUE TO SIZE AND WEIGHT, PICKUP OR SHIPPING BY CUSTOMER.
www.EngineShipping.com is a good source for transporting these, as they have picked up many engines for my customers over the years. These are about 410 lb. If you go with a transport company, they will usually require the engine strapped down to a palate. I charge $75 to prep the engine for transport. This includes providing a palate, and materials to securely strap the engine down to palate and wrap in tarp or other material.

My Address is 104 New Rand Rd, Garner, NC 2752, which is about 10 miles SE of Raleigh, NC and is only 2 miles form Interstate 40, 22 miles from Interstate 95, and 32 miles from Interstate 85 as they cross through NC. If traveling through NC and need a transmission you can save a lot on shipping if you stop by in person.

I CAN DELIVER ... SOMETIMES, If you are not too far from me, or in route to one of my traveling destinations. Ask if you are not sure.

EMAIL ME at jasonedge64@outlook.com

Views: 20

Reply to This

Photos

  • Add Photos
  • View All

Forum

Rear suspension project

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Robert Alan Shannon yesterday. 9 Replies

I’m starting the complete rear suspension update/upgrade-new springs and shocks,replacing spherical joint and bushings on yoke and control links! Just wondering if there are any tips to help with the…Continue

TV rod adjustment 1963 Cad

Started by Mark Geertsma in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Tuesday. 4 Replies

I’m struggling with my TV rod adjustment. I’ve been trying to adjust it as per shop manual, but it’s still not OK. When cold, it shifts smoothly through all four gears, when hot, it hesitates (lots…Continue

Tags: adjustment, rod, TV

Vintage Promo Picture #3 - 1963 Fleetwood 60 Special in Royal Maroon

Started by Jason Edge in 1963/64 Cadillac Specific Discussion on Monday. 0 Replies

Here is the 3rd picture in my collection of "Promo Pictures" - a 1963 Fleetwood 60 Special.  This 60 Special appears to be Royal Maroon, Paint Code 52.  Not sure exactly how these were used, but they…Continue

Blog Posts

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service