I'm a new owner of a beautiful survivor 64 Sedan Deville.  Shes missing a bolt on the back lower passenger side exhaust manifold.  I was told by the seller its a unique bolt?  I'd like to try and fix it by next weekend as she does the put put under acceleration.  Any help or ways to point me to the correct part are greatly appreciated!

Views: 88


Reply to This

Replies to This Discussion

The 12 factory exhaust manifold to cylinder head bolts has a 9/16" hex head, thread is 7/16x14. The two left driver side rear bolts are 1 1/2” long & others are 2 1/4” long.  The bolt shank size (7/16"x14) is a common size and you can find bolts with this thread at hardware stores but that 9/16" hex head is smaller than the standard 5/8" hex head found on most 9/16" bolts.  I have plenty of the longer original 2 1/4" long bolts and like the one missing on your passenger side.

I sell that bolt in very good condition for $3 each, which drops to $2.25 with 25% Chapter discount.   If interested email me at jasonedge64@outlook.com. If keeping the exact bolt head appearance is not important, you can find the 7/16"-14, 2 1/4" long bolts at places like www.boltdepot.com. You just want to make sure you get the Grade 5 or Grade 8 (preferred), hardened bolt. I am showing the bolt depot price of $1.39. Click Here to check it out. You may also be able to find the bolt at the local hardware and home improvement stores. Again, if you want the exact original bolt I have it.

Id like original but for now I'd like to fix the tick

You can order an new aftermarket Grade 8 thru Bolt Depot (or perhaps find at local hardware store), or shoot me an email and I will give you a total with shipping and I can have one shipped Priority as soon as tomorrow. 

Shes as smooth as my 390 in my 59 but that exhaust tick is obnoxious under acceleration
Rosalie (64) gets picked up later this week. For a quick fix your data will do but I'd like to give her an OEM 24.

The gasket is probably burned through. I have copper gaskets that will not burn through or soften up.  

Please email me at russ@thecadishack.com  

Exhaust leak has been fixed and she now sounds like a Cadillac and not a tractor. Thanks to everyone who helped.



  • Add Photos
  • View All


Trivia #29 - What Movie Is this?

Started by Jason Edge in Trivia. Last reply by Jason Edge 12 hours ago. 11 Replies

It has been a while since we did some trivia and I was watching a movie last night and saw this 1964 Coupe de Ville that briefly makes an appearance.   The Trivia Question is: What Movie Is this?…Continue

A 2nd Look At 1964 Cadillac Print Ad with an Alternate Version

Started by Jason Edge in General Discussion yesterday. 0 Replies

In our recent look back at standard 1964 Cadillac color print ads, one was "FIRST ONE UP GETS THE CADILLAC". Eric DeVirgilis pointed out there was an alternate version where the lady gets the…Continue

My '64 Deville Radio Rebuilt and Upgraded.

Started by Michael Vogler in 1963/64 Cadillac Specific Discussion. Last reply by Kurt on Friday. 4 Replies

My original '64 Devile radio has been rebuild and upgraded.  Can't wait to get in back in the car!https://youtu.be/DgYqoV290KwContinue

Current 1963/64 Cadillac Listings on eBay

Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Friday. 0 Replies

To see all 1963/64 Cadillacs Listed on eBay in the USA…Continue

Tags: ebay

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…



  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service