I know I've been asking a lot of questions lately, and the advice here has been outstanding, especially from Jason.   Than you all!
I want to have my de Ville repainted in the original Aspen White paint color. It needs it.
I got my first estimate today from a recommended paint shop (along with some minor body work to take the dings out) in Aspen White (no clear coat) for about $12,000 (which will take about three months).
The shop owner explained that clear coat was not generally used in 1964 and clear coat can peel over time (i.e. "car cancer"), and did not recommend that I put clear coat on the car.  (Years ago, I had a black Yukon with clear coat which came off in places after about a decade).
The shop will take it down to primer level or metal (as necessary) and take off much of the chrome trim, head and tail lights, bumpers, etc. before painting.  Because I am painting the car the same color, I am not having the door jams, inside the trunk, or inside the hood painted. 
I have never had a car painted before, much less my Cadillac!  I am unsure of the cost, though, and would like to know your thoughts about the costs and time.  I live in Southern California (Huntington Beach) and expect the price to be a bit higher than what it might be elsewhere.  Also, I'm not looking for a "Concourse" show car paint job, but a very nice paint job on an every weekend driver.. 
Thank you all, again.
Mike Vogler

Views: 328

Reply to This

Replies to This Discussion

Tony,

Well that figures!  Nothing is easy.  Thanks for the heads up.  Do you have a paint recommendation?

Mike

Perhaps the shop will work with you and do sections of the car at a time tackling the worst sections first.  I have a fantastic local shop but as Mark noted insurance work is their bread and butter replacing plastic parts with plastic parts on newer cars after a quick spray.  That is sad because my guy is really good with the old metal bodied cars ... but he had to make a living and fully understand. With that he agreed to break my car down and do it in about 4 different sections. This took about a year and a half. I also agreed to pull all the trim and bumpers off that section as needed except the window reveal trim.  With that approach I would usually have the car to shop on a given Monday and pick up that following weekend.  While it took about 1.5 years it worked out great by spreading out my expenses, and allowing my guy to really concentrate on a specific area as we can. We are current doing my 2002 Escalade EXT in that manner. He recently painted the hood and the top and waiting for a call to bring in for the next state.  The EXT is black which is an easy match. The Sierra Gold took a few trial runs on the 1st attempt but once they had the formula down pat it was easy going for remainder sections of car.

With daily driver accidents most people want their car back ASAP, but if you explain to painter you are not in that big of a hurry, they might agree to paint in stages as they did mine. Of course you don't want to use a here today, gone tomorrow operation and want to use a reputable established paint shop. My shop has been in business since 1958 and run by original owners son for the last 25 years.  
 

Mike

I also live in Orange County, CA and will be looking to have my family's '64 Sedan DeVille to be painted in the coming years. It still has the original Aspen White too and is finally showing rust (garaged most of its life). Piece of information for ya, a body shop in Long Beach, CA (8+ years ago) told my dad that if he still wanted the original lacquer-based '64 paint he would have to either get it himself from Arizona, for example, or have a relative bring some out this way on a trip. My dad really wanted it to be the original lacquer even though the body shop owner said that today's enamel (mineral spirit-based) paints are so good that all that effort getting the out-of-state paint likely wasn't worth it.

I'm hoping you post follow-up information as you progress through your paint process. Curious who you end up using and what you experienced with that shop.

Rob

Hi Rob,  I’ll keep you posted.  Love to see your SDV and say hello.  Let’s meet at Donut Derelicts sometime.

Mike

Hi Mike

I’ll PM you sometime and yes let’s make that happen. My SDV will be heading into the shop soon for some carb tuning and a few other issues. 
Rob

RSS

Photos

  • Add Photos
  • View All

Forum

alternator V belt

Started by Robert Alan Shannon in General Discussion. Last reply by Robert Alan Shannon 9 hours ago. 2 Replies

 Could anyone give me the Gates or Dayco number for the alternator V belt, just can't remember it and trying to get her back on the road after many years.  63 wA/CContinue

Tags: belt, V, alternartor

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion 19 hours ago. 0 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Trivia # 35 - All About the Windshields

Started by Jason Edge in Trivia yesterday. 0 Replies

Keeping the trivia "glass related":- How Many Different Windshields Were Used On All 1963 & 1964 Cadillac Body Styles? - What were the two main differences or subgroups of windshields? Hint, one…Continue

Trivia #34 - What % of 1963 & 1964 Cadillacs Came with Tinted Glass

Started by Jason Edge in Trivia. Last reply by Jason Edge yesterday. 6 Replies

What % of 1963 and 1964 Cadillacs came with the optional "soft ray" tented glass?  1963 & 1964 were very close, so if you get one you will get the other. Need to get it within 3%. So, who will…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service