In October 1983, I purchased 4 reproduction BF Goodrich Silvertown bias ply tires, (820x15 with a one inch whitewall) from Coker Tires for my 1964 Eldorado. They have been on the car since last week, since I decided to put radials on the car. Yes, they are 35 years old and have 5000 miles on them. I was wondering if anyone would be interested in these as display tires on your car at car shows, as a swap for driver radials, in order to avoid point deductions at judged shows. They are NOT on rims. The whitewalls are like new, and there are no marks, abrasions, cracks or dry rot on these tires - they look great. I can honestly say that these tires have never been wet except for occasional whitewall cleaning. I'd like to get $125 for the set of 4. Ideally, local pick-up in the Buffalo NY area would be the best deal, as I'm speculating that shipping would be around $25 a tire (I have not looked into the options yet.) Please contact me at jppuma@yahoo.com if you have an interest.
Jerry Puma
1964 Eldorado Survivor Registry
Tags:
Hi Jerry, I know some people do exactly as you are suggesting, use radials as the driver tires, then have a set of original style for show day. Maybe someone can put these to good display use.
The tires have been sold.
Started by Jose Raul Ramirez in Wanted to Buy. Last reply by Russ Austin on Tuesday. 2 Replies 0 Likes
The body shop lost my armrests! I need the driver's side and passenger side. The ISSUE is my 63 did not come with power windows It has manual crank windows so the armrests are not setup for switches.…Continue
Started by Phil in 1963/64 Cadillac Specific Discussion on Tuesday. 0 Replies 0 Likes
If anyone has a need for a decent running 390 (trans available as well, but needs work), out of a 63, I have one available in the state of WA. I know it's frowned upon by some, but I'm completing an…Continue
Started by Michael Monson in Wanted to Buy. Last reply by Michael Monson on Tuesday. 2 Replies 0 Likes
I’m looking for both the cover plate over the torque converter and the cover over the flywheel. Apparently over the last 60 years, both have “fallen off” and now I’m looking on putting it back…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Monday. 3 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
September 14, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by