Brake Vacuum Booster
Back 10 years ago I had a master break leak and went to Pep Boys and bought a replacement. The replacement is from a 1968 (I think) with a 2 bolt vacuum booster. Worked for 10 years, and it has a life time guarantee so no complaints, except. I now want to go back to the original part a 4 bolt Delco unit. I have a fresh rebuilt master cylinder (stainless steel sleeved – primo stuff) but I went to install it and I have the 2 bolt vacuum booster, not the 4 bolt I need.
Any idea where I can but a perfect 4 bolt vacuum brake booster??
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
Try ebay, or send yours out to get rebuilt. Your rebuilt 4 bolt master cylinder will bolt up to the 2 bolt booster. Just use the top 2 studs.
-
Permalink Reply by Frank Murch on
-
I do not have a core, do you have a core? Because I don't have a core, I am not exactly sure what (Cardon number or Delco number) is correct
-
-
I have a core. Shoot me an email; russ85747@hotmail.com I am currently traveling for work, but plan on being back up into the parts this Tuesday.
I'll just need an email with what you want and your zip code for a shipping quote.
Members
Forum
Commercial Chassis Dual Battery Tray Questions
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 17 hours ago. 2 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
Meet-Up of 1964 Cadillacs in downtown El Segundo Car Show August 16
Started by Jason Edge in Chapter Discussion 19 hours ago. 0 Replies 0 Likes
Chapter member Alan Clark and owner of a 1964 Eldorado sent this and wanted to share with everyone in case there are others nearby that might want to attend:"I'd like to invite the 63/64 chapter…Continue
The $120,000 1963 Eldorado on Bring a Trailer
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Friday. 7 Replies 0 Likes
I have got a flood of email, texts, about the 63 Eldo that recently bid up to $120,000 and thought I would share for those that have not seen it.Here is the link:…Continue
Fuel Supply System - Check Points Beyond the Fuel Pump
Started by Jason Edge in General Discussion Aug 6. 0 Replies 0 Likes
Incredibly, in 3 days I have had 3 people ask about replacing their fuel pump or even adding an electric fuel pump because there carb is not getting gas. It has gotten to the point I have copied and…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
