All,
after being on my first outing my 1963 has a broken engine bearing and I have decided at this point to do a full engine remanufacture.
Do you have any experience or recommendations for Remanufacturers?
So far I have been in contact with Jasper's.
I am in Charlotte, NC.
Thanks
Daniela
Tags:
I had a customer come from Tennessee and pick up a rear end from me this week and we got to talking and he said he had had his engine rebuilt by Jasper a few years and a few thousand miles ago. My ears popped up since I had just read some negative stuff here about them and asked my customer how it went and he said "The car is running fine, not leaking or any issues." I told him well I guess you cannot ask for more than that.
This is one sample out of probably hundreds of engines they have rebuilt. It does not confirm they are good or bad overall ... but just thought I would share. I think they have picked up engines from me in the past when I might have 4 to 6 laying around, but that has been some time back. I had no issue with then and remember they paid a fair price for the engines. Just thought I would pass this along. If I considered them as a source for a rebuilt engines I would want to get many references, and some recent references with our 390's and 429's.
Daniela, If no one has a suggestion or reference you might try contacting EGGE Auto Parts. They are a known source for quality engine rebuild parts and think they would be a prominent supplier for quality rebuilders. You might ask them for recommendations. Parts would likely be sourced from them so that would be a win-win for both of you.
Here is there contact info:
EGGE Machine Company - www.egge.com
Pistons, Eng. Rebuild Parts
11707 Slauson Ave, Sante Fe Springs CA 90670
800-866-EGGE, www.egge.com
Also since you are in Charlotte area, home to NASCAR and engine rebuilders, maybe Travis from the Carolina Region can provide some reference. I have no one I would recommend in the Raleigh, NC area, not to mention it is 2.5 hrs away from you.
Daniela, my son had an engine rebuilt by Beal Racing Engines in Thomasville, NC. Even though they specialize in racing engines, they do work on most anything. My son had a Pontiac 455 engine rebuilt, and some enhancements to it for more hp, but nothing radical. They can probably rebuild/repair any engine. Their website is https://www.bealracingengines.com/ It might be worth a call to them to see what they can do for your engine.
Started by Bobby Brown in General Discussion 7 hours ago. 0 Replies 0 Likes
My reservoir is a little low. Any recommendations on my purchase of refill fluid? There are likely new fluids and I’d like to buy the right product. Thanks. Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 4 Replies 0 Likes
So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Thursday. 3 Replies 0 Likes
I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 8 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
July 20, 2025 from 8pm to 9:30pm – Zoom
0 Comments 0 Likes
© 2025 Created by Jason Edge.
Powered by