I haven't posted here much lately but wanted to pop in and say hello and share a minor but irritating personal mishap. Last week I tripped over a short ladder in my garage and came down in 4th finger on right hand. I ended up dislodging my last 2 digits of finger and shoving it under the first digit. It looked CRAZY. I went to hospital and they X-rayed and reset the finger and set in place with a splint. They also said I have a minor fracture.
During all of this, even the resetting there was not much pain, but I am an old school finger keyboard typist and it is crazy how long it takes me to type even this short message. The good news is I am left handed but who "writes" anymore?!
I have also had to shelve my work on the next newsletter which I had just started really getting into.
The good news is we can still Zoom this Sunday!
Anyway, it was not a major medical problem, but thought I would share. Hope you are all doing well!
Tags:
Jason,
Sorry to hear about the finger injury. Hopefully it will heal soon so you can get back to working on your Caddy. I'm also left handed, so better it happened on the right. Hope you feel OK.
Dennis DiBari
Thanks. I have figured out how to do everything from post hole digging to lugging parts around one handed but I will be glad to get that finger back for typing!
Started by Patrick Westphal in For Sale. Last reply by Jason Edge on Monday. 1 Reply 0 Likes
Hey everyone,I have a set of front bumpers, both ends and the center section, that I am looking to sell. If you are looking for these contact me and we will talk about it. …Continue
Started by Norman Silverman in 1963/64 Cadillac Specific Discussion. Last reply by Norman Silverman on Sunday. 5 Replies 0 Likes
Hello AllI am thinking about replacing the shocks on my 64 SDV. I want to do so with units that are closest to what was originally in the car in so far as ride quality. I believe these were gas…Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Sunday. 1 Reply 0 Likes
Last night I was installing the freshly cad plated inner fender to frame rear support brace rods and remembered how this has been often missing on the many parts cars I have brought in. The thing is…Continue
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge on Sunday. 2 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by