Happy Father's day to all the Dads, and to the Dad's that Inspired Us

I hope all the dad's out there have a great Father's Day, and each of us in turn remember the dad's that inspired us. My dad was a huge influence on me and cars and think back to all the great times we had with the old Cadillacs.  I was always more the "bookish" type around cars and he was always the more pragmatic hands-on type that taught me that you often learn a lot more by grabbing a hand full of tools and a flash light and just jumping under the car to figure out something.  In other words he taught me to learn by doing.  More importantly, our shared interest in cars deepened our bond and love for each other and always remember the great times we had together. Here is a video tribute I did of my dad a few years back using a song by Colin Hay, a favorite artist of mine, call 'Dear Father'.  The lyrics include the line "I've got your photograph" which brings me back to the many pictures we took working on the Cadllacs, a few of which you see in the video.

Perhaps others have memories with their dad, or sons and daughters they would like to share.

Facebook Facebook

Views: 109

Reply to This

Replies to This Discussion

Jason,
Great tribute. My experience is kind of the opposite of yours. My dad was a mechanical engineer who took the analytical approach. I was the young kid who was good with tools so I just wanted to take everything apart and then figure out what I needed to do. Mini bike engine won't start? Better strip it down and rebuild it, I figured. Pop would often come in at this point and offer some wisdom and help put everything back together.
I did figure out a lot doing things this way but eventually learned that working smart sure beats working hard.
My son who happens to currently be serving in the Air Force, is also pretty mechanically inclined but from the start, he was more on the methodical side. Before he took on a project, he usually had a plan of attack he had formulated from internet research. I guess I am the oddball caveman in the middle.

If there was an information superhighway available to me when I was a kid, I probably wouldn't have checked it until I had everything apart and needed to figure out how to put it back together. I certainly rely on it now though and wonder how we managed without it.

Bit early..... Father's day is 1st Sunday in September. (in Australia at least)

Every day is Father's Day for me. I probabl think about my dad every time I go on my garage.

RSS

Photos

  • Add Photos
  • View All

Forum

Dino Diaries - July 11, 2025 - Busted!

Started by Jason Edge in General Discussion. Last reply by Jason Edge 16 hours ago. 4 Replies

So I am starting to crawl around under Dino seeing what I can fix or upgrade and as I was putting the trans linkage in a few nights ago, the rear trans mount caught my eye. I remembered that these 64…Continue

Bleeding brakes

Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Thursday. 3 Replies

I have finished replacing all the rear suspension and am at the last item, which is bleeding the rear brakes. I am using the Jason Edge vacuum pump method and all went well with the rear passenger…Continue

Front grill

Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Wednesday. 8 Replies

Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue

Getting hot when going fast…

Started by Mack in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 6 Replies

So… I do have a few of 63 Coupes, all have same setup with carbs, Pertronix, shroud, new US Radiator radiators etc … but only one of them gets a bit hot when I am hauling faster than 60mph and car…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service