My 64 Caddy Dino is indeed back In action officially as of yesterday with hood hinges and hood installed.
I had my brother Randy stop over after work and help with the hood install. As we held either side, wife Cheryl started the bolts through the hood nut strips. My plan was to just get it on there where it would close, then take to body shop, but we actually got it on pretty staight. There will be a bit of what learned or relearned about hood adjustment in the next newsletter. It is not perfectly set but not bad at all.
Of course the hood hinges with the new Cadmium plating look fantastic, as well as the upper hood latch. As nice as I thought it looked before I can now show off all that new plating! The night before I put about 15 miles on Dino, and last night about 10 miles with wife Cheryl and the two pooches. Cheryl will be out of town for a couple of days and see myself taking pooch cruise breaks often this weekend!
So, here are some pictures with Dino's new hood hinges and some cruise shots from last night.... as I posted on my Facebook Page --> LET THE GOOD TIMES ROLL!
Tags:
So glad to see you got the Cadillac back in action. Happy cruising!
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 12 hours ago. 2 Replies 0 Likes
I'm looking for some info and hopefully some pictures on the commercial chassis dual battery setup. Is the second battery tray (driver side) , the same as the passenger side or is it mirrored? I'm…Continue
Started by Jason Edge in Chapter Discussion 15 hours ago. 0 Replies 0 Likes
Chapter member Alan Clark and owner of a 1964 Eldorado sent this and wanted to share with everyone in case there are others nearby that might want to attend:"I'd like to invite the 63/64 chapter…Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge on Friday. 7 Replies 0 Likes
I have got a flood of email, texts, about the 63 Eldo that recently bid up to $120,000 and thought I would share for those that have not seen it.Here is the link:…Continue
Started by Jason Edge in General Discussion Aug 6. 0 Replies 0 Likes
Incredibly, in 3 days I have had 3 people ask about replacing their fuel pump or even adding an electric fuel pump because there carb is not getting gas. It has gotten to the point I have copied and…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by