This got some humorous replies on Facebook and wanted to share here on the 63/64 site.
I was installing the lower hood latch with all the new gold cadmium bling on my 64 Coupe de Ville "Dino" today and it was easier to just remove the optional Eldorado Horn, and thought, might as well clean and wax before I install it again. It has a lot of sheen and I'm thinking I clear coated that bad boy but need to go back and look at the pics I took when I restored it.
Anyway here is a picture of my "Holding my Horn" just after a good waxing and a couple with the lower hood latch installed:
Tags:
It did give me pleasure "waxing my horn!" LOL
... but nothing quite as pleasureable as blowing it!!
Holy cats thats a clean engine bay!
Started by Jason Edge in Restoration Discussion 28 minutes ago. 0 Replies 0 Likes
Scanning thru the Feb issues of Hemmings I found a listing for Gary's Steering Wheels. I didn't think I had heard of them but looked on our …Continue
Started by Jason Edge in 1963/64 Cadillac Specific Discussion 46 minutes ago. 0 Replies 0 Likes
While I have most of the fasteners mapped out and selling with new cadmium plating, for the top side stuff, there are nuts, bolts and washers, etc. on the underside I have not completely mapped out.…Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge 1 hour ago. 3 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Started by Jason Edge in General Discussion. Last reply by Jason Edge 1 hour ago. 2 Replies 0 Likes
I always get a kick out of the expression when someone asks how many…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
© 2025 Created by Jason Edge. Powered by