i have a leak when it rains on my passenger side wdw. my rubber floor matt has water on it after a hard rain, i have tried to track it using a hose to follow the water intrusion.. the rubber that is there is clearly dry and cracking.and there are some gaps,, i tried to temp fix it with some gasket maker and sort of seal the cracks, but it didnt work out too well.. made a mess,,
the part i am looking for is the rubber that fits into the roof, and when the door is closed, the window fits into that rubber, thus, creating the seal to keep the water out,, at least i hope thats were its coming from.
Is it possible that it could be getting behind or under the roof rail gutter on the top of the roof and finding a way in from there, i dont know the configuration of those metal trims, and how they keep water out or if there is a seal in there somewhere as well
is that part called the 'Roof Rail rubber" or roof rail set, not the vent window seal but the one that runs the entire window opening..that stuff is high and i dont want to order the wrong set..
Tags:
Yes Kim, it's called roof rail seal/weatherstrip. They also make the whole car look so much sharper!
Rubber the right way has a door and window kit. Get the kit it's cheaper. I had the same problem I had a kit installed and no more leaks and very little wind noise.
i spoke to them,, Rubber right way that is,, going to order a set soon
Travis J. Hensley Online
Started by Dave Fehrle in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal 19 hours ago. 2 Replies 0 Likes
So I have been having problems with my brake lights. At first I thought it was both sides and turns out it is only the drivers side. Also, I thought the blinker worked and it didn’t and turned out…Continue
Started by Phillip Hill in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Tuesday. 11 Replies 0 Likes
Hi everyone im currently restoring my my front grill due to some previous clown painting it with silver frost paint and doing a dodgy job I would like to know what parts of the grill are anodised.it…Continue
Started by Nile Bolen in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari on Monday. 4 Replies 0 Likes
I checked the Help page and did a search on the site but didn't see any subjects on steering play/slack. Since I had someone complete a front end rebuild (Kanter kit, all the control arm bushings,…Continue
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Vogler on Monday. 12 Replies 0 Likes
Late in the evenings, I wonder about things I will probably never do as I am not that crazy. However, I know someone out there has tried it or wanted it bad enough they have done it. My 64 Fltwd did…Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
© 2025 Created by Jason Edge.
Powered by