Since retiring I have several house project at any given time in addition to my Cadillac projects. Sometimes they collide into each other and am often able to use tools from one endeavor with the other. Here I am using an engine lift with steel cables I use to strap engines to palates to lift well pump pipe out of well casing pipe.

Views: 145

Reply to This

Replies to This Discussion

So.... My wife comes home from work and she says to me "So I get home and the first thing you want to show me is how far you have your pole in the air!" LOL. As seen in 1st picture below, I had lifted the water pump pipe about 20' up over the water pump casing pipe. I then cut it, then lifted 2 more 10' sections for a total of 40' of pipe. I still don't see the bottom and gave it a rest as temps are 90+ today (meaning with our humidity it would be 150 degrees in AZ LOL).  The 2nd section is one of the 10' sections. 3rd picture is the hook I made up  with steel cable I use to strap engines down.

RSS

Photos

  • Add Photos
  • View All

Forum

Replacement 63 Radiator Recommendations

Started by Mike Travers in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth yesterday. 1 Reply

My 61 year old radiator sprung a leak (actually a few leaks). What are you guys using as replacements? Are you replacing with copper or aluminum? How many rows are you running in the radiator? How's…Continue

T-3 low beam headlight

Started by Jeff Donaldson in Wanted to Buy on Monday. 0 Replies

Hi,I need one T-3 low beam headlight if anyone has a spare they would like to sell.CheersJeffContinue

1958 thru 1964 Cadillac Jetaway Front Coupling Unit Complete

Started by Doug Scarrow in For Sale on Sunday. 0 Replies

just listed https://www.ebay.com/itm/266787800087Correct complete front unit coupling fits 1958 thru 1964 Cadillacs Hydramatic transmission The…Continue

Blog Posts

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Vintage Air AC

Posted by Chase on March 21, 2024 at 5:55am 0 Comments

Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!

accumulator dryer

Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments

Who rebuilds original AC  accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year ,  There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A    What  is everyone using ? I would prefer to be as original as possible. Thanks

'63 Eldorado trumpet horn + 2 standard horns restoration

Posted by Les Eastling on November 15, 2023 at 10:34am 1 Comment

My son, unbeknownst to me, had all three of the horns on our 1963 Eldorado completely restored. We had recently added the Eldorado trumpet horn to the two standard horns and the sound was not very good... we had heard good ones so we knew something was not right... but there was not much we could do to get better sound from the 3 horns. 

There is a restoration service called The Horn Works who my son…

Continue

Videos

  • Add Videos
  • View All

© 2024   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service