To find Local Regions and Chapters click on:
Click on CLC Region and Chapter Websites for a spreadsheet listing in PDF format.
(updated Jan 10, 2016)
Hello, and thanks for adding to group!I am restoring 1964 429 engine which I bought as dismantled. It is said to be smoking in driving and has been stored as parts for a year. It is most probably…Continue
Question: would a 64 Coupe Deville originally be equipped with cut pile carpet or nylon loop? Looking to replace me carpet, but the carpet on the lower rear front seat seems to be cut pile. I prefer…Continue
I removed the front cover to change out the timing chain & gears all that went pretty well when I put the cover back on I put in a fresh oil filter ,filled it up figured it would be enough to prime the oil pump when I started the car .Fired up the car and heard lifters rattling, So I shut the car down right away. So I removed the oil filter housing, and poured oil down the neck of the oil pump housing filled it up and filled up the filter put it all together and fired it up and same…Continue
Caddy members, I’m upgrading my 64 2-door coupe deville.
motor guy lost my block (machine shop went under) so I’m replacing motor & tranny with LS conversion. I have motor parts (other than block) for 429, rebuilt transmission, converter, and too many other motor parts not needed with fully dressed LS going in.
Email me (Tom.firstname.lastname@example.org) or call me (210-739-4854) if you’re interested…..I live in San Antonio, TX.
While working on my trunk lock on 64 Cadillac, I mistakenly closed the locking mechanism while the trunk was open. Is there an easy way to manually release the lock back to the open position?
I'm located in Melbourne, Australia and my 64 sedan de ville is stuck in the garage due to failed mechanical fuel pump. The first after market mechanical fuel pump lasted a few years before it failed & left me stranded 5 hours from home. A hire car and tow got us home. On inspection, I noticed a valve not seated within the housing. I was optimistic, pressed it into place and assumed the pump was good to go. But alas, no. From what I can now determine, the diaphragm pushrod…Continue