Not exactly Cadillac related but I am finding a good use for the many Coil Springs I have pulled off the many parts cars I have brought in:
I have been replacing my low voltage Halogen yard lights which pull 10 to 20 watts each with LED lights which pull 0.8, 1.0 and 2.0 watts on our many yard lights over the past few weeks. I have probably 150 to 200 of the old glass phone pole electrical insulators, and wanted to add them to the LED bollard lights, and found that if I use the heat gun to pop the black painted top dome off, I had a nice flat ridge to superglue the insulators to. Overall they give off a much brighter light with a unique lighting effect when up against a back wall. I also have dozens of coil springs from the 43 parts cars I have brought in and have cleaned and painted many and installed around the lights as a protector and yard art! I should have all lights around my garage and two parts sheds complete in the next couple of weeks. Needless to say I think it is different.
Started by Jeff Donaldson in General Discussion. Last reply by Jeff Donaldson 3 hours ago. 3 Replies 0 Likes
Hello Everyone,I tried to remove my clock today and couldn't seem to get it to rotate more than a 16th to an 8th of an inch. I followed the instuctions in the manual (counterclockwise approximately…Continue
Started by Jason Edge in For Sale 17 hours ago. 0 Replies 0 Likes
I will be out of town Dec 25-29 so anyone that needs something or wants a…Continue
Started by Jason Edge in General Discussion on Monday. 0 Replies 0 Likes
I have very limited space in my 3 bay garage with the left and right bay used for storage and work tables, etc leaving the narrow center aisle for my 1964 Coupe de Ville Dino. Six years ago I bought…Continue
Started by Stephen Pechenik in General Discussion. Last reply by Bill Wolf on Monday. 13 Replies 0 Likes
Hello Co-Members,I recently purchased a low mileage1963 Sedan Deville Park Avenue. It is extremely solid and runs well. Neverthelss, it has minor problems that need to be addressed before I can…Continue
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
ContinuePosted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Posted by Chase on March 21, 2024 at 5:55am 0 Comments 1 Like
Hey everyone, has anybody done a Vintage Air AC/Heat setup in their car? I want to bypass the old vacuum setup and go with a Vintage Air Gen 2 model. Before I get started, does anyone have any experience with this? (Which model to go with, do’s and dont’s, etc.) It looks pretty involved. Any and all info/pics would be greatly appreciated. Thanks!
Posted by CHRIS CARLSON on December 6, 2023 at 10:54am 0 Comments 0 Likes
Who rebuilds original AC accumulator dryers for 1964 Cadillac? I have been on Classic auto air in Tampa FL wait list for over a year , There is one on Old air products web site that looks very similar to the original # 21-4214A but states it fits 1962 Gm cars, The one recommended for a 1964 Cadillac is half the length 21-4215A What is everyone using ? I would prefer to be as original as possible. Thanks
© 2024 Created by Jason Edge. Powered by
You need to be a member of 63/64 Cadillac Website to add comments!
Join 63/64 Cadillac Website