Please post a pic of door panel
Replies to This Discussion
-
Permalink Reply by 3ft7bqmb7dryo on
-
Phil, do you have a series 62? or a series 63
-
Permalink Reply by Phil Jakubowski on
-
deville convertible
-
Permalink Reply by Jason Edge on
-
Phil, Here are a couple of pictures of my 64 CDV with the door panels installed. These will be the same door panel as your 64-6267 DeVille Convertible. Only difference between the door is your side glass and vent window glass and frame are shorter...panels are the same. Note that I have power vent windows, so you would have the grooved stud with crank handle in top front painted metal plate if you have manual vent windows. Click image then click "View Full Size" to enlarge:
-
-
Do not forget to put a liner between the panel and door. I only know about 61-62 Cadillac doors but if they are the same the door liner goes into a long slot at bottom of door. The water will run down the liner and be funneled back inside the door and out the weep holes in bottom of door. It keep the door panel dry. If not you will have wrapped door panels.
-
-
This is how I did my car. See the rain drops. This is what happen when it rains. My car was all together except for the inside door panel.
- Attachments:
-
-
image.jpeg, 859 KB
-
-
-
It is a strong oil type paper. I have never sourced any and use the thick mil plastic as Dave did. Seems to keep the water off the door panel and out of the car which is it's purpose.
-
-
Joining in on the door panel water shield paper. I have not ordered any but plan to try it RUBBER THE RIGHT WAY has a product listed for that purpose in their catalog.
-
-
Gene, Maybe you can post a picture once you get it tacked up to the door. thanks, Jason.
-
-
Jason, Maybe in a year or two. LOL
-
-
Thank you everyone for the info. I will post pics when completed
-
-
Can someone please post a photo of the Interor door without the door panel. Just the naked steel inside door. I want to see if the 63-64 door has a long slot for water barrier to slip in to.
-
Members
Forum
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari 4 minutes ago. 17 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 9 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
1963 Eldorado Trim complete set
Started by Robert Dye in For Sale yesterday. 0 Replies 0 Likes
This is complete set of nice 63 Eldorado trim. Would like to sell as complete set but have duplicates of most of the moldings that can be sold separately. I am attaching a few pictures but you can…Continue
Convertible bumper jack
Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark on Monday. 4 Replies 0 Likes
My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk. Anyone have a picture of the item I should find?Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
