Well, Ol Blue  is on another adventure.

Left NE Ks this morning and made it to El Reno Ok to pick up Rt 66 again. About 360 mi. Ate famous Fried Onion Bergers at Sid's Diner on the Rt.

Heading for Amarillo along 66 tomorrow. So far so good.

Tom B

Views: 116

Reply to This

Replies to This Discussion

Sweet ! keep us posted

In addition to driving Rt. 66, we met up with the N Texas, New Mexico, and Colo. regions of the CLC for their Cadillac Ranch Inter-Regional meet. We made it to Amarillo Fri. afternoon. This was a very well organized, well run event with lots of things planned. Toured the Cadillac Ranch, ate at the Big Texan steakhouse, toured a couple classic car places, and drove down Palo Duro Canyon where we watched the play Texas. We caravanned to all these places with a '41 Fleetwood leading the way. There was one other '63 - Deville convertible from the Denver area. My thanks to Rubye Musser, Nick Manol and all the CLC members for making us feel welcome.

Ol Blue clicked off the miles at 65-70 with no problems. After the meet we decided to head further west on Rt 66. Man, there's not a lot out there in the Texas Panhandle and New Mexico. We drove Interstate at most for about 40 minutes, all 2 lanes the rest of the way.

There were some pretty neat places like the U Drop Inn in Shamrock Tx. A beautifully restored vintage gas station, café and gift shop.

Magnolia Station in Vega, Tx.

We continued west to Tucumcari New Mexico and I decided Ol Blue didn't need to go any further west. We left Rt 66 and headed up Hwy 54 across a lot of flat nothing in NM, Tx., Ok. to Liberal Ks.

Made it back to Rossvile Ks Monday evening. 1497 miles. Great trip, great people, lots of fun

Tom B.

RSS

Photos

  • Add Photos
  • View All

Forum

Burning Rubber

Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 12 hours ago. 6 Replies

Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light?   Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue

Gas gauge only reads half when full

Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply

Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue

64 Brakes

Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply

Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue

Heater Core Replacement

Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies

I'm currently rounding up parts for a heater core replacement in my 1964 Deville.  I'm looking for replacement hoses that connect to the heater core itself.  It's a factory a/c car and has the metal…Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Loud air moving sound within carb with cleaner removed

Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments

While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?

Videos

  • Add Videos
  • View All

© 2026   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service