64 Rear Center Bumpers Available at Tri-City Plating
I had sent Tri-City Plating a 64 rear center to see if it could be rechromed, and it was too far gone, but got into a conversation with Chip, and he said he has 4 good 1964 rear center cores. The rechrome price is $585 and claimed one for myself for my personal 64 CDV. That leaves 3 available, and I sent an email to the 3 contacts I had on my wait list looking for one. One has already indicated they found one, so that leaves at least 1 extra available... maybe 3 if the other 2 contacts do not want need or want one. I did ask about 63 rear centers, and Chip said they didn't have that one. I also told him to be on the look out for front lower end (buckets).
I have had other chrome work done by Tri-City and have been extremely pleased. If interested contact Tri-City at 1800-251-7536 and ask for Chip. Their website is at http://www.tricityplating.com/. Tell them Jason at Classic Cadillac Parts sent ya!
Replies to This Discussion
-
Permalink Reply by Chris Codd on
-
I went ahead and made the call to order one. I had purchased a bumper recently that looked way better in the pictures. Thanks for the tip! Looking forward to getting the dented up bumper on my car replaced.
-
Permalink Reply by Jason Edge on
-
That's at least 2 of the 4 they have on hand spoken for.
-
-
Just spoke with Chip again today and apparently the rest of the bumpers were too rotted to be repaired, so I will be sending mine and hoping it is in good enough shape to restore.
-
-
Sounds good. Fingers crossed.
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Kurt 1 hour ago. 7 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson Feb 15. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
