In Need of 63 390 Intake Manifold
Are there any other years that interchange or is it the typical 1 year only part? Need manifold without cracks.
Thanks
Tom B
Replies to This Discussion
-
Permalink Reply by Robert Alan Shannon on
-
Tom , I think the 63 thru 67 intakes are the same.
-
-
63-66 are the same. In 67, the intake was redesigned for a different carburetor. The 67 intake will not fit the 63/64, without switching to a 67 valley pan.
-
Permalink Reply by Tom Bahner on
-
Thanks Russ. I assume you don't have one in stock. Would rather buy from you or Jason when I can. Tom B
-
-
I do not have any intake manifolds on hand right now.
-
-
Tom
I have a 390 intake
No cracks that I can tell
If interested, text me at 630-707-1652
I don't have a pic at the moment....but can get some when I get back home on Tuesday
Thx!!
Mark
-
-
I found a pic
- Attachments:
-
-
IMG_0235.JPG, 1.8 MB -
IMG_0234.JPG, 1.9 MB
-
-
-
Mark, thanks for the reply. The only way you can tell if its cracked is by looking at the bottom side of it which unfortunately means taking it off. You can hear a manifold leak when the engine is running under a little load. I'll try to give you a call
Tom B
-
-
Tom
Ok.....
I can remove it and look
I assumed you were referring to cracks where the mounting bolts are
Are you in need of anything else?
Mark
Members
Forum
Logans Intake Project, 1964 Fleetwood, Progress Report #3
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Logan Robb 6 hours ago. 5 Replies 0 Likes
Not much of an Update and Questions: I was inspecting the top end and had removed the air cleaner in preparation to replace the intake. It was dirty so decided it needed a wipe down. My goof was…Continue
headlight / dimmer switch confusion (63 Sedan Deville)
Started by Bill Wolf in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf yesterday. 4 Replies 0 Likes
The schematics are from the repair manual and show a LIGHT BLUE wire coming from the headlight switch to the dimmer switch. From the dimmer switch to the low beams on a TAN wire and to the high beams…Continue
Replacement Front Crankshaft Seal - 1964 Eldorado (429ci)
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge yesterday. 2 Replies 0 Likes
My mechanic is having difficulty sourcing a front crankshaft seal. Can anyone recommend a replacement front crankshaft seal, and where to purchase? Amazon has a few that I think(?) are replacements…Continue
Tags: Seal, Crankshaft, Front
Original Rim Color
Started by Logan Robb in 1963/64 Cadillac Specific Discussion. Last reply by Michael Stinson yesterday. 3 Replies 0 Likes
When I get some new shoes for my 64 Fleetwood, I'd like to recondition the rims. I'd thought of getting them powder coated, and still plan to eventually, but the $700 quote I received shunted that…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
