Rebirth of a Cadillac....
Rebirth of a Junk Yard 1964 Cadillac in Upcoming January Newsletter.... stay tuned
Replies to This Discussion
-
Permalink Reply by 3n49omug8n28i on
-
Looks like my car just a little rougher around the edges. That looks like a Canadian car from the Ottawa area that I've read about before.
-
-
Very nice looking great potential!
-
-
This car has no business sitting in a salvage yard; looks straight and mostly complete. What the heck are some people thinking? Just unreal.
-
-
Sweet!
-
Permalink Reply by Jason Edge on
-
Here's an excerpt of this car's story, which will be published in a few days in our January Newsletter:"When I raised the hood what I saw was bad enough to bring tears to your eyes. He had used a cutting torch to remove the engine and transmission. In the process he had cut EVERYTHING. All the brackets for the alternator and power steering pump were cut, all the supports for the transmission were cut, all the power steering hoses, rad hoses and transmission cooler lines were cut along with most of the wiring harness. He had also cut the engine mounts- all with a torch. I knew this was going to make this restoration that much harder. Looking at this massacre, I became even more determined to bring her back. "Stay tuned for more...
-
-
Could this be my long lost 63?
-
-
No this is a 1964 4 Window Sedan de Ville. Scroll up to the top and you will see a picture.
-
-
Jason, That sounds interesting and I'm looking forward to reading the full story. From what I have read here, the car sounds like a lost cause and if it was me doing the restoration, I'm thinking I would have kept looking for another car to start with even though the exterior looks solid and straight.
-
-
Full story just posted - www.newsletters.6364cadillac.com
-
-
You'd wanna kill the old guy for what he did to remove the olds engine.
Good save of a 64 though and a nice feel good story.
-
-
Interesting read and a good story. That would be a real bummer to buy the car only to have it butchered by the seller before receiving it. The buyer did mention he had heard that the junkyard owner was a crusty old guy but that's still seriously uncool.
-
Permalink Reply by Chris Codd on
-
Is this the guy from YouTube that goes by Cadillacguy100 because this car looks exactly the same as his?
Photos
Members
Forum
Burning Rubber
Started by Kim K Kaiser in 1963/64 Cadillac Specific Discussion. Last reply by Linda M. Brooks yesterday. 5 Replies 1 Like
Out of curiosity,, is the 63 64 engine capable of burning rubber off of a stop light? Not a hold the brake and rev up and release, but from a stop, to burn rubber power?I know mine wont because i…Continue
Gas gauge only reads half when full
Started by Kenneth Barton in 1963/64 Cadillac Specific Discussion. Last reply by Russ Austin on Wednesday. 1 Reply 0 Likes
Hi everyone, I installed a new gas tank sender in my 63 after bench testing it and confirming ohm range on the bench.However after installing and filling it up, it only reads half full after filling…Continue
64 Brakes
Started by Jeff Donaldson in General Discussion. Last reply by Dennis P. DiBari on Monday. 1 Reply 0 Likes
Hi,It's time to do a brake job on my Fleetwood. When I imported my car from the US to Canada I had to have my car safety inspected before I could license it in the Privince of BC. After the…Continue
Heater Core Replacement
Started by Michael Monson in 1963/64 Cadillac Specific Discussion. Last reply by Michael Monson on Sunday. 6 Replies 0 Likes
I'm currently rounding up parts for a heater core replacement in my 1964 Deville. I'm looking for replacement hoses that connect to the heater core itself. It's a factory a/c car and has the metal…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
New old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2026 Created by Jason Edge.
Powered by
