Hi All,  I have a 1963 6229 with the fairly common sandalwood interior (trim code 34) and bahama sand exterior (44).  I'm trying to figure out what color the dash pad and top of the doors are really supposed to be.   The top of the pad has all the usual cracks and was in the sun for a long long time, and appeared to be a greenish medium tan color.  Thinking the greenish tinge was from sun fading (the carpets appear that way as well), I removed the pad, and underneath where protected from the sun, the pad still looks to be a medium tan color with a green tinge, almost like an olive drab color.  Looks like that under the autronic eye as well.  Are the dash pad and door tops in a sandalwood interior really supposed to be a greenish tinge, or is that just bad sun/heat fading of a medium sandalwood (tan) color?

I had contacted SMS a while back to see if I could get a sample, and I could get samples of the upholstery fabric but not the dash pad/door top materials - they want a sample of mine to make a color match.  I'm not convinced I want to duplicate the color I'm seeing, if it's no longer the correct color. due to age.

I can find color chips for the exteror paint, but I can't find any for the dash pad.  Any suggestions?  I appreciate the replies!

Thanks!  Terry

Facebook Facebook

Views: 205

Reply to This

Replies to This Discussion

I have the same color car as you and my dash faded to that weird greenish color as well. I had mine died to match closer to the color of the speaker grill on the dash. When I removed the dash, it was brown in the areas where it was protected by the sun. Here is a before and after photo. 

http://6364cadillac.ning.com/photo/before-1?context=user

http://6364cadillac.ning.com/photo/after-1?context=user

Wow!  That is quite a difference!  Your "before" pics look very similar to my pad in color, except that you can still see the brown on the edges of yours at the doors.  On mine, the top looks very close to yours.  Underside, and under the autronic eye /speaker grill, it's not brown/tan but a slightly more greenish version of the olive drab color.

Your "after" pics look real nice!  The color is what I was hoping to be the correct color, since I already bought 4 yards of it...

Thanks for the link to the pictures!

Even though Christopher hinted it, the best way is to remove the dash and look on the hidden side. You can cut away a small piece and send to SMS.

Yes, I did pull the pad.  Even the piece of the dash that is covered by the top of the brightwork on the instruments is this weird greenish color.  The piece under the autronic eye is olive drab too.  I tried scrubbing the pad with detergent to see if it made a difference, and there wasn't much of one, but the color transferred to the paper towels I used to dry it.  Underside, the color transfer was much less.

I do know this car sat in the sun for a long time.  The tint on the top of the windshield is even brownish.  I almost wonder if someone had pulled the pad many years ago and redyed or resprayed it.

I'll see if I can post a picture tonight.

Terry,

Check the interior trim data and interior paint color charts in the help section. There were also dealer interior swatch books occasionally for sale that might help  

Another resource for Cadillac factory interior specs is Jenkins Interiors. You can call Hill Jenkins and tell him I referred you. 

Regards,

Jeff Kinzler

Thanks for the tip!  I did look for color samples of the pad online here, but I didn't find any.  I'll give Jenkins a call.

RSS

Photos

  • Add Photos
  • View All

Forum

seat foam replacement

Started by Kevin Robles in 1963/64 Cadillac Specific Discussion. Last reply by Kevin Robles 15 hours ago. 3 Replies

does anyone out there have any experience with seat foam replacement on  a 63/64 Cadillac.  I had my seats reupolstered  many years ago in original leather/fabric and they still look great, but the…Continue

1963 carter afb carbureter stainless steel shim

Started by tim sparks in General Discussion 21 hours ago. 0 Replies

anybody have an xtra stainless steel shim for 1963 carter afb carb. thank youContinue

Timing cover corrosion

Started by CHRIS CARLSON in 1963/64 Cadillac Specific Discussion. Last reply by Dennis P. DiBari yesterday. 1 Reply

Hey fellas if you're rebuilding your 429 check your timing cover for corrosion behind the water pump  Russ and I had 429 engine number two on the dyno today had shimed the oil pump spring for a…Continue

Convertible bumper jack

Started by Alan Clark in 1963/64 Cadillac Specific Discussion. Last reply by Alan Clark yesterday. 13 Replies

My car lacks the mechanism or spring needed to hold the jack in the storage slot on the right side of the trunk.  Anyone have a picture of the item I should find?Continue

Blog Posts

1963 RHS A/C kick panel - photos needed

Posted by SK on June 2, 2025 at 2:20pm 2 Comments

Could someone post front and back photos of the 1963 right-hand kick panel with A/C?

My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.

Many thanks,

-Samu

Edelbrock Carb Block off Plates

Posted by Chase on March 12, 2025 at 2:05pm 14 Comments

Hey guys,

I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…

Continue

'63 Tailfin Tales

Posted by Mark Mata on February 22, 2025 at 5:00pm 9 Comments

New old stock seat material

Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments

I bought this seat material thinking that it’s…

Continue

Videos

  • Add Videos
  • View All

© 2025   Created by Jason Edge.   Powered by

Badges  |  Report an Issue  |  Terms of Service