I've seen this vintage "Made in Hong Kong" 1963 Cadillac convertible solid state radio from time to time over the years but never picked one up. Yesterday this one popped up on my regional Craig's List filter for $25, and I jumped on it. It uses a 9 volt battery and works and had a cool sort of dark gold finish! I did some quick searches and seems it was produced sometime later in the 1960's by a company called Federal. It is noted as Model Cad-1 on the box, however, there is no date that I can find on the car or box. Anyway, I thought I would share. I do have a Cadillac Toys and Models photo album I started some time back and will add this one.
Tags:
love it.
Okay you confirmed it. Yes you are a nerd!!!!
And I like it too.
Kurt, That is a very nice display. Yes, I had seen this 63 am radio numerous times on eBay but never picked one up. The local Craig's List listing was too much and had to bite! Glad I did. It is a nice addition to any 63/64 Cadillac collection!
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Jason Edge 8 hours ago. 2 Replies 0 Likes
Hi allwhere can I find these - 1963 Cadillac Plastic Door Pin Anchors. Mine are from1963 and a little tiredThanksContinue
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth yesterday. 15 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinuePosted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
June 22, 2025 from 8pm to 9:30pm – Zoom
0 Comments 1 Like
© 2025 Created by Jason Edge.
Powered by