Pulling in Parts Car #54
Back to the hotel in Hickory NC with parts car #54 - a 1964 Series 62 Four Window Sedan. Lots of goodies on this beauty! Headed home with our prize tomorrow.
Replies to This Discussion
-
Permalink Reply by 0ohxwnggz2vlp on
-
I still need a good glove box door latch my friend...
-
-
Matthew, I have a glove box latch if you are still looking.
Ian Osborne
-
-
Looking for a flexplate for my 64 DeVille. Let me know if it's available my man.
-
Permalink Reply by Jason Edge on
-
Hi George, Email me at jasonedge@nc.rr.com to go on the Wait List. I have a few already on the list and of course this parts car has the Hydramatic driveplate.. so it will be a future parts car that starts to whittle down the list.
-
-
Gotcha. I should be on your list already. Thanks my man.
-
-
George. You are #5 of 5 with the first dating back to late 2018. I noticed none on the list are CLC or Chapter members. Join the CLC, then our Free Chapter and you will go to the front of the line and get first preference on all parts and 10% Discount.. OH. and you join the coolest car club on the planet and start receiving the award winning Self-Starter Magazine, and can join regions, attend Grand Nationals, go on driving tours and many other perks. It's a Win-Win-Win..and a few more Wins to boot!
-
-
Wow.. I knew it wasn't gonna be easy to find the flex plate but 3 years someone's been looking.? That's kinda a bummer. I'll check out the CLC when I get a minute and sign up. Thanks again.!
-
-
I've got 66 customers that have been waiting for really hard to find parts since 2013. The earliers entries are 2009.
-
-
George, I may have sourced a flex plate for you. email me please; russ85747@hotmail.com with your zip code for a shipping quote.
-
-
Will do
-
Permalink Reply by Wayne Morris on
-
I'm still looking for a right brow molding for my 64 series 62. I should be on your list
-
-
You are on my list and will remain there until I find one or you let me know you no longer need. You are currently #2 on the list. Join the CLC and our 63/64 Chapter and you would bump up to #1 spot.
Members
Forum
Rear Main Seal Oil Leak Fix with Bearing Cap Modification
Started by Kurt in 1963/64 Cadillac Specific Discussion. Last reply by Matti Roth 7 minutes ago. 15 Replies 4 Likes
Many owners have reported oil leaks at the rear main seal even after replacing the seal, myself included. Recently Tony Lentini found a Serviceman bulletin published in February 1965 which details a…Continue
Future of CLC Judging
Started by Jason Edge in Restoration Discussion. Last reply by Jason Edge on Thursday. 6 Replies 0 Likes
First, A Big Thank You to CLC Chief Judge Bill Anderson for taking on this daunting task of overhauling the CLC judging system. The old system was very good, however, I believe what Bill and the…Continue
front seat crest
Started by Frank Murch in 1963/64 Cadillac Specific Discussion. Last reply by Frank Murch on Tuesday. 3 Replies 0 Likes
Original seats had a crest on the center arm rest. Does anybody know where I could embose a crest in new material for a reupolstry?Continue
Coolant Overflow Bottle / Reservoir for 64 Cadillac Eldorado
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Bill Wolf on Tuesday. 7 Replies 0 Likes
Greetings Everyone. I read a discussion thread about "radiator and related", covering coolant overflow. Has anyone fitted an overflow reservoir / bottle to their 64 Cadillac? Is there if a…Continue
Blog Posts
1963 RHS A/C kick panel - photos needed
Posted by SK on June 2, 2025 at 2:20pm 2 Comments 0 Likes
Could someone post front and back photos of the 1963 right-hand kick panel with A/C?
My car didn’t come with the original kick panels, so it's a bit of a mystery to me how I should cut the backing board and carpet to fit around the A/C.
Many thanks,
-Samu
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Events
Videos
© 2025 Created by Jason Edge.
Powered by
