Pulling in Parts Car #54
Back to the hotel in Hickory NC with parts car #54 - a 1964 Series 62 Four Window Sedan. Lots of goodies on this beauty! Headed home with our prize tomorrow.
Replies to This Discussion
-
Permalink Reply by 0ohxwnggz2vlp on
-
I still need a good glove box door latch my friend...
-
-
Matthew, I have a glove box latch if you are still looking.
Ian Osborne
-
-
Looking for a flexplate for my 64 DeVille. Let me know if it's available my man.
-
Permalink Reply by Jason Edge on
-
Hi George, Email me at jasonedge@nc.rr.com to go on the Wait List. I have a few already on the list and of course this parts car has the Hydramatic driveplate.. so it will be a future parts car that starts to whittle down the list.
-
-
Gotcha. I should be on your list already. Thanks my man.
-
-
George. You are #5 of 5 with the first dating back to late 2018. I noticed none on the list are CLC or Chapter members. Join the CLC, then our Free Chapter and you will go to the front of the line and get first preference on all parts and 10% Discount.. OH. and you join the coolest car club on the planet and start receiving the award winning Self-Starter Magazine, and can join regions, attend Grand Nationals, go on driving tours and many other perks. It's a Win-Win-Win..and a few more Wins to boot!
-
-
Wow.. I knew it wasn't gonna be easy to find the flex plate but 3 years someone's been looking.? That's kinda a bummer. I'll check out the CLC when I get a minute and sign up. Thanks again.!
-
-
I've got 66 customers that have been waiting for really hard to find parts since 2013. The earliers entries are 2009.
-
-
George, I may have sourced a flex plate for you. email me please; russ85747@hotmail.com with your zip code for a shipping quote.
-
-
Will do
-
Permalink Reply by Wayne Morris on
-
I'm still looking for a right brow molding for my 64 series 62. I should be on your list
-
-
You are on my list and will remain there until I find one or you let me know you no longer need. You are currently #2 on the list. Join the CLC and our 63/64 Chapter and you would bump up to #1 spot.
Members
Forum
Replace Choke Tube or Install Electric Choke?
Started by Michael Stinson in 1963/64 Cadillac Specific Discussion. Last reply by Patrick Westphal 4 hours ago. 4 Replies 1 Like
My mechanic has sourced a choke housing and new internals. As you might expect, the choke tube is damaged and or clogged. My options are to either replace the choke tube, or my mechanic recommends…Continue
Tags: Electric Choke, Choke Tube
Correct whitewalls
Started by Richard Stanley in 1963/64 Cadillac Specific Discussion 11 hours ago. 0 Replies 0 Likes
I just replaced my tires from Diamondback (I had bad results in the past from Coker). It was the second time, due to the age of the tires. About 18 years ago Diamondback made custom whitewalls…Continue
Dino Radiator Leak - Time to Recore!
Started by Jason Edge in General Discussion. Last reply by Jason Edge yesterday. 35 Replies 0 Likes
I had brought up the topic of radiator leaks as a discussion topic for our Chapter Zoom meet-up this past Sunday and thought I would share on our website for everyone and probably do a more formal…Continue
1963 390 upper heater core hose
Started by Kenneth M Karrer in General Discussion. Last reply by Bill Wolf yesterday. 5 Replies 0 Likes
Hello, My 63 convertible is a low mileage (34k) original car so while I've done some basics, like replacing radiator hoses, belts, and a few gaskets; I've been trying to leave things as is as…Continue
Blog Posts
Edelbrock Carb Block off Plates
Posted by Chase on March 12, 2025 at 2:05pm 14 Comments 1 Like
Hey guys,
I have installed the same Edelbrock carb and have done everything the same as Jason’s carb and intake project. In the spring and summer months the car starts, runs and idles great! In the fall and winter months on a cold start, the car starts awful and wants to die until it warms up. I have to keep my foot on the throttle until it warms up or it will idle just terrible and try to die. Once it’s warm, it runs fantastic! Whats going on here? I was thinking of removing the…
ContinueNew old stock seat material
Posted by Ray Schick on August 22, 2024 at 6:25pm 2 Comments 0 Likes
I bought this seat material thinking that it’s…
Loud air moving sound within carb with cleaner removed
Posted by Dave Fehrle on March 23, 2024 at 3:23pm 8 Comments 1 Like
While checking my Carter carb with engine running, I took the air cleaner off and there was a very loud hissing sound of air. I placed a piece of paper over the carb and it didn’t move up or down, is this normal?
Events
© 2025 Created by Jason Edge.
Powered by
